Powered Door Handles with Wireless Control and LED Lighting
This four-handle upgrade adds automatic handle presentation and illuminated grip areas to the selected Model 3 or Model Y version. A wireless link connects the handles to the controller, while the supplied wiring provides the electrical connections. The kit supports OTA firmware updates and nine LED color or effect modes.
- 4 Powered Handles
- Wireless Control Link
- 9 LED Modes
- OTA Updates
Hauptmerkmale
-
Automatic presentation
The powered exterior handles extend with supported unlock or phone-key events and retract after locking.
-
Wireless communication
Each handle communicates with the main control box; electrical power connections and the supplied harness are still required.
-
Integrated lighting
LED strips illuminate the extended handles, with nine color or effect modes for customization.
-
OTA updates
The handle system supports firmware updates without removing the handles; use the instructions for the supplied controller.
-
Four-handle kit
The set includes four powered handle assemblies, a control box, wireless adapters and connection wiring.
-
Model-specific selection
Three vehicle groups are offered: Model Y / Juniper 2020+ with Model YL 2026+, Model 3 / Highland 2021+, and Model 3 2017–2020.
Highlights
Automatic Handle Presentation
The exterior handles extend with supported unlock and phone-key events. Presentation makes the grip accessible; it does not replace the vehicle door lock, latch or interior emergency release.
Handles and Control Hardware
Four handle assemblies work with the main control box, wireless adapters and wiring.
OTA Firmware Updates
Firmware can be updated without removing the handles. Follow the instructions supplied for your controller and vehicle interface; software support and configuration differ between versions.
Integrated LED Strips
Choose from nine colors or effects, including white, blue and purple. The LEDs illuminate while the handles extend and switch off when they retract; use modes permitted in your market.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y / Model Y Juniper | 2020+ option | Combined Model Y option also covers Model YL 2026+. |
| Model YL | 2026+ option | Covered by the Model Y option. |
| Model 3 / Model 3 Highland | 2021+ option | Later Model 3 option. |
| Model 3 | 2017–2020 | Separate older Model 3 option; do not substitute a later-version harness or controller. |
Three options: Model Y / Juniper 2020+ (also Model YL 2026+), Model 3 / Highland 2021+ and Model 3 2017–2020. Harnesses and controllers are not interchangeable between options. The 10–16 V listing alone does not establish compatibility with every low-voltage architecture or circuit.
Technische Daten
| Produkttyp | Powered exterior door handle kit with wireless control and LED lighting |
|---|---|
| Compatible Models | Model Y / Juniper 2020+ and YL 2026+ option; Model 3 / Highland 2021+ option; separate Model 3 2017–2020 option. |
| Position / Location | Four exterior door handle positions |
| Material | ABS handle exterior |
| Surface Finish | Matte |
| Farbe | Black exterior; selectable LED lighting modes |
| Menge | 4 powered handles |
| Spannung | DC 12 V system; listed working range 10–16 V. |
| Lighting Modes | Dazzle, streamer, red, green, blue, white, ice blue, orange and purple |
| Installation Type | Replacement handle assemblies with powered connections and a wireless handle-to-controller link |
| Lieferumfang | Four handles, control box, wireless adapters and wiring |
What's in the Box
- 4×Powered door handle assemblies
- 1×Main control box
- Wireless adapters and connection wiring
- Mounting accessories supplied with the selected kit
Installation
- Park the vehicle and follow the corresponding vehicle service procedure for door access and low-voltage isolation.
- Install and adjust each handle using the instructions for the supplied hardware. Seat and lock the correct connectors, secure the wiring clear of moving glass and retain the original latch and release mechanisms. Restore all door access plugs, seals and tape.
- Pair and configure the supplied controller while parked. Perform any required window calibration.
Gut zu wissen
Achtung
- Keep access to the original interior door releases and emergency-release mechanisms for your exact vehicle.
- For front-door service, restore all access plugs, tape and door-shell seals.
- Choose LED colors and effects permitted for exterior use in your market. Complete configuration while parked, and stop using the system if it causes door, window, locking or electrical faults.
Pflege
- Clean with a soft damp cloth and dry gently. Avoid directing a pressure-washer jet into handle gaps or electrical connections.
- Monitor operation after firmware updates or vehicle service.
FAQ
Does wireless mean there are no power wires?
The wireless feature is the communication link between the handles and control box. The powered assemblies still need the correct electrical connections and supplied harness.
Which vehicle option should I choose?
Model Y / Juniper 2020+ (also Model YL 2026+), Model 3 / Highland 2021+ or Model 3 2017–2020. A shared option name does not make all harnesses interchangeable.
Can I switch the handle LEDs off independently?
The lighting operates with handle extension and turns off when the handles retract. No independent lighting switch is listed.
Will automatic presentation work without vehicle power?
Powered presentation depends on the handle system supply. The exterior LED and touch function are not a backup release.
English 
German 
Spanish 