Powered Door Handles With RGB Welcome Lighting
These replacement exterior handles combine motorized presentation with RGB welcome lighting. The four-door kit includes a V3 controller, dedicated wiring and hardware. Choose Model 3 Highland 2024+ or the combined Model Y Juniper 2025.03+ / Model YL 2026+ option. A built-in button cycles the lighting colors.
- Powered Presentation
- RGB Lighting
- Four Handles
- Model-Specific Kit
Hauptmerkmale
-
Powered Presentation
Motorized replacement handles extend for exterior door access
-
RGB Welcome Lighting
Integrated lighting offers Blue, Red, White, Purple, Green and multicolor modes
-
Handle Color Button
A built-in button cycles through the light modes
-
Four-Door Kit
The set includes four handles with a controller and dedicated wiring
-
Model-Specific Options
Select Highland or the combined Juniper / YL option
-
ABS Handle Body
The handle housing uses ABS plastic
Highlights
Illuminated Handle Detail
The handle has an integrated light strip. Cycle its built-in button to choose Blue, Red, White, Purple, Green or the multicolor mode while parked.
Exterior Installed Example
The installed photograph shows a presented handle with purple lighting.
Color Mode Examples
The color examples illustrate the lighting choices. Use only exterior lighting colors and effects permitted for your location and vehicle use.
Controller and Vehicle Signals
The controller connects through dedicated wiring. Factory key authorization and locking remain necessary.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | |
| Model Y Juniper | 2025.03+ | Same option as Model YL |
| Model YL | 2026+ | Same option as Model Y Juniper |
Fits Model 3 Highland 2024+, Model Y Juniper 2025.03+ and Model YL 2026+. The Juniper and YL vehicles share one purchase option. Does not fit earlier Model 3 and Model Y generations; they require a different kit. Controller input range: 10–16 V.
Technische Daten
| Produkttyp | V3 auto-present electric door handles with RGB welcome light |
|---|---|
| Compatible Models | Model 3 Highland (2024+), Model Y Juniper (2025.03+), Model YL (2026+) |
| Material | High-impact ABS plastic |
| Menge | Set of 4 handles with V3 control unit |
| Spannung | DC 12V designation; input range 10–16 V |
| Lighting Modes | 6 modes: Blue, Red, White, Purple, Green, Multi-color streamer |
| Installation Type | Handle replacement and matched controller/harness connection |
| Installation Time | Estimated 2–3 hours for all four doors |
What's in the Box
- 4×electric door handles
- 1×V3 control unit
- Dedicated wiring
- Hardware set
Installation
- Follow the applicable vehicle procedure for low-voltage isolation and door access. Fit the handles and controller using the exact kit instructions without bypassing factory locks or emergency-release systems.
- Route the dedicated harness clear of window travel and moving parts, keep door sealing and drains intact, and reconnect according to the vehicle and kit procedures.
Gut zu wissen
Achtung
- Preserve factory key authorization, door latches, locks, interior electrical releases and manual emergency-release access. Added handle presentation does not replace those systems or make the doors open after loss of vehicle power.
- Keep fingers, jewelry and loose items away from moving handles.
- Set light modes while parked. Exterior colors and effects must comply with local vehicle-lighting requirements; use only permitted settings when the vehicle is in use.
- Avoid directing high-pressure water at the handles or electrical connections.
Pflege
- Keep handle gaps free of debris and avoid forcing a frozen or obstructed handle.
- Avoid high-pressure jets on the handles and connectors. Inspect alignment and seals periodically.
- The added controller uses vehicle power. Arrange diagnosis if battery or electrical alerts appear or the handles operate abnormally.
FAQ
How are the light modes changed?
Press the built-in handle button while parked to cycle Blue, Red, White, Purple, Green and multicolor. Use only settings permitted for your location.
Does presentation replace factory unlocking?
No. Factory key authorization, locking and latch operation remain necessary.
Can this be fitted to an earlier Model 3 or Model Y?
The options are Highland 2024+ and the combined Juniper 2025.03+ / YL 2026+ kit. Earlier generations need their own matching kit.
What is included?
Four handles, a V3 control unit, dedicated wiring and a hardware set.
English 
German 
Spanish 