Clear TPU Door-Corner and Lower-Side Film for Model 3 and Model Y
Cover selected lower painted areas with pre-cut clear TPU film. Choose the 12-piece pattern for pre-refresh Model 3 or the 8-piece pattern for pre-refresh Model Y. The layouts differ: the Model 3 illustration also includes lower-side strips, while the Model Y layout shows corner-area patches. This is a local protection kit, rather than a full-body wrap.
- Clear TPU
- Pre-Cut Patterns
- Model 3: 12 Pieces
- Model Y: 8 Pieces
Hauptmerkmale
-
Clear TPU Film
Adds a transparent film layer over the matched lower painted areas.
-
Pre-Cut Shapes
The shaped film pieces are arranged for the listed pre-refresh model versions.
-
Model 3 Twelve-Piece Set
The Model 3 option includes corner patches and lower-side strips shown in its layout.
-
Model Y Eight-Piece Set
The Model Y option uses the eight corner-area pieces shown in its separate layout.
-
Adhesive Application
Align each piece with its intended panel and press the film down using the application instructions.
-
Local Panel Coverage
The kit covers the illustrated lower areas rather than the complete vehicle body.
Highlights
Model 3 Layout
The Model 3 diagram shows left and right corner patches, wheel-arch-adjacent pieces and lower-side strips. Its option contains 12 film pieces for the listed pre-refresh body.
Model Y Layout
The Model Y diagram shows eight pieces for the left and right lower corner areas. Select this pattern for Model Y 2020–2024; the Model 3 lower-side strips are not part of this layout.
Film on the Paint Surface
The close-up shows clear film being positioned on a lower painted door area. Each piece is cut to the panel shape and leaves adjacent panel gaps and seals free.
Prepare Before Application
Lay out the selected pattern, identify each panel and prepare clean, sound paint. Use compatible paint-preparation materials and a suitable film squeegee; follow the film instructions for bonding and curing.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–October 2023 | Pre-refresh; 12-piece corner and lower-side pattern. SKU TSL0609-3-transparent. |
| Model Y | 2020–2024 | Pre-refresh; 8-piece corner-area pattern. SKU TSL0609-Y-transparent. |
Fits Model 3 2017–October 2023 and Model Y 2020–2024. Does not fit Model 3 Highland, Model Y Juniper or Model YL.
Technische Daten
| Produkttyp | Pre-cut door-corner and lower-side paint protection film kit |
|---|---|
| Compatible Models | Model 3 2017–October 2023; Model Y 2020–2024, pre-refresh versions |
| Position / Location | Lower door corners and wheel-arch-adjacent painted areas; lower-side strips also shown for the Model 3 set |
| Material | TPU film |
| Farbe | Zurücksetzen |
| Menge | Model 3: 12 film pieces; Model Y: 8 film pieces |
| Installation Type | Adhesive-backed film applied to the matching paint surfaces |
| Care Instructions | Wait at least 48 hours before washing after installation; avoid harsh solvents and abrasive polishing |
What's in the Box
- 12×Pre-cut clear TPU film pieces with the Model 3 option, or 8 x film pieces with the Model Y option
Installation
- Lay out the kit and identify the matching left and right panels. Position each shape with its backing intact, clear of openings, sensors and adjacent gaps.
- Clean the intended paint surfaces and remove dust, wax and grease with compatible preparation materials. Follow the film instructions for surface condition and application method.
- Peel and position each piece. Work gently from the center outward with a suitable squeegee, avoiding dirt trapped under the film, overstretching and contact with adjacent seals.
- Press the edges down and let the adhesive bond. Wait at least 48 hours before washing.
Gut zu wissen
Achtung
- Choose the correct pre-refresh model pattern; this listing excludes Model 3 Highland, Model Y Juniper and Model YL.
- Match each piece to its intended panel before peeling the backing. Keep panel gaps, seals, drains, lights, sensors and camera lenses uncovered.
- Apply to clean, sound paint. Not for repainted, damaged or previously wrapped surfaces.
- Wait at least 48 hours before washing. Avoid aggressive heat, harsh solvents and abrasive polishing.
Pflege
- Wash gently after the initial bonding period using products compatible with the film and paint.
- Avoid harsh solvents, abrasive polishes and concentrated pressure-washer spray at film edges.
FAQ
Which versions can I select?
The 12-piece Model 3 kit is for pre-refresh Model 3 2017–October 2023. The 8-piece Model Y kit is for Model Y 2020–2024. Highland, Juniper and YL are excluded from this listing.
Do both kits cover the same areas?
They have different layouts. The Model 3 diagram includes lower-side strips along with corner patches; the Model Y diagram shows eight corner-area pieces. Each kit follows its own diagram.
Is this a full-car wrap?
The kit covers only the illustrated lower painted areas. It is clear film, and the highlighted layout areas identify placement rather than the film color.
How soon can I wash the vehicle?
Wait at least 48 hours after installation, then wash gently using compatible products and the film instructions.
Can the film be used on repaired paint?
No. The film is for clean, sound paint; adhesion and removal depend on the surface condition.
English 
German 
Spanish 