8.5 mil Pre-Cut TPU Headlight Protection Film with Clear, Smoked & Photochromic Options for Tesla Model Y

Pre-Cut TPU Film for Model Y Front Lamp Surfaces

Add a flexible TPU layer over the front lamp lens surfaces with a pre-cut kit for original Model Y, Juniper, YL or Standard. Choose clear, smoked or photochromic finish. Smoked and photochromic finishes change tint and reduce light transmission.

Pre-Cut TPU
3 Finishes
Version-Specific Panels
Wet Application

Hauptmerkmale

Pre-Cut Panels

Each pattern corresponds to a front lamp layout.
TPU Surface Layer

Flexible thermoplastic polyurethane film covers the selected lens surfaces.
Clear Finish

The clear option adds a transparent layer over the lens surface.
Smoked and Photochromic Options

Smoked film adds tint; photochromic film changes its tint with light conditions.
Version-Specific Quantity

Original Model Y and Standard kits have two pieces; Juniper and YL kits have five.
Wet Application

Position the film with water and work the liquid toward the edges using a suitable squeegee.

Highlights

Position with Water - TESVX Headlight Film — Position with Water

Wet application lets you move the film into alignment before securing it. This installation example illustrates the method.

Work Toward the Edges - TESVX Headlight Film — Work Toward the Edges

Use a suitable soft-edged squeegee to move water outward. Re-wet and reposition an edge if needed rather than forcing a crease into the film.

Finish with a Soft Towel - TESVX Headlight Film — Finish with a Soft Towel

Wipe the lens and follow the film instructions for drying and settling before washing.

Choose Finish and Kit Size

Original Model Y and Standard kits contain two pieces; Juniper and YL kits contain five. Clear, smoked and light-reactive photochromic are separate finish choices.

Kompatibilität

Modell	Years / Version	Hinweise
Model Y	2020–2024	2 pieces
Model Y Juniper	2025+	5 pieces
Model YL	2026+	5 pieces
Model Y Standard	2026+	2 pieces

Fits Model Y 2020–2024, Model Y Juniper 2025+, Model YL 2026+ and Model Y Standard 2026+, with a separate pre-cut kit for each front lighting layout.

Technische Daten

Produkttyp	Pre-cut TPU headlight protection film
Compatible Models	Model Y 2020–2024, Model Y Juniper 2025+, Model YL 2026+, Model Y Standard 2026+
Position / Location	Headlights
Material	TPU (thermoplastic polyurethane)
Surface Finish	Transparent, smoked tint or photochromic
Menge	2 pieces (Model Y 2020–2024, Model Y Standard) or 5 pieces (Juniper, YL)
Dicke	0.22 mm (8.5 mil)
Installation Type	Wet application with squeegee and heat set

What's in the Box

Model Y 2020–2024 and Model Y Standard: 2 pieces of pre-cut film
Model Y Juniper and Model YL: 5 pieces of pre-cut film

Installation

Difficulty: Advanced
Werkzeuge: Suitable soft-edged squeegee, spray water and clean soft towels; any heat treatment must follow the film instructions

With the lights off and lenses cool, clean the surfaces using a lens-compatible method. Remove dust, grease and residue and work in a clean sheltered area.
Wet the film and lens as instructed. Position each panel against its matching lens outline without cutting directly on the lamp.
Slide the film into alignment, then use a suitable squeegee to move water toward the edges. Lift and re-wet an edge where necessary; avoid excessive stretching.
Wipe with a soft towel and smooth the alignment and edges.
Allow the film to settle as instructed.

Gut zu wissen

Achtung

Smoked and photochromic film reduce light transmission and alter emitted color. None of the finishes carries road approval.
The pre-cut panels leave cameras, sensors and vents uncovered.

Pflege

Keep the film and edges clean with a compatible gentle method; avoid abrasive cleaners and direct pressure washing of edges.
Inspect lifting, folds, clouding or trapped debris and correct any effect on lamp output.
Film adds a surface layer; it does not make the lamp immune to stone impact, scratches or heat damage.