ABS Trim for Your Physical Turn Signal Stalk
Customize a matching physical turn signal stalk with an adhesive ABS cover. Choose glossy or matte black, or carbon fiber texture in glossy black, matte black or red. This is a decorative overlay for the original stalk; it does not add a stalk to a vehicle or replace a gear selector.
- ABS
- 5 Finishes
- 3M Adhesive
- Cleaning Kit Included
Hauptmerkmale
-
Turn Signal Stalk Overlay
A decorative shell for a matching physical indicator stalk, rather than a gear selector replacement
-
ABS Construction
The cover uses ABS engineering plastic
-
Five Finishes
Choose glossy black or matte black, or carbon fiber texture in glossy black, matte black or red
-
Adhesive Attachment
3M double-sided adhesive bonds the cover to the stalk
-
Cleaning Kit
Included preparation kit for compatible bonding surfaces
Highlights
A Cover for the Original Stalk
The ABS shell follows the indicator stalk outline. Covers the original stalk and leaves its movement, return action and control markings clear.
Carbon Fiber Texture on ABS
Glossy black and matte black carbon fiber texture options provide a patterned finish on ABS, rather than a structural carbon fiber part.
Red Texture or Plain Black
A red carbon fiber texture option is also available, alongside plain glossy black and matte black. Select one finish when ordering.
Adhesive and Preparation Kit
The cover uses 3M double-sided adhesive and the package includes a cleaning kit. Dry-fit before peeling the liner and use preparation products only on compatible surfaces.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | Requires matching physical turn signal stalk | |
| Model 3 Highland | 2026+ | Requires matching physical turn signal stalk |
| Model YL | 2026+ | Requires matching physical turn signal stalk |
Fits the original physical turn signal stalk; does not fit stalkless vehicles. A model name alone does not establish compatibility with stalkless versions or a different aftermarket stalk; this cover does not add turn signal controls.
Technische Daten
| Produkttyp | ABS turn signal stalk cover |
|---|---|
| Compatible Models | Model Y Juniper; Model 3 Highland (2026+); Model YL (2026+), with matching physical turn signal stalk |
| Position / Location | Physical turn signal stalk |
| Material | ABS engineering plastic |
| Surface Finish | Glossy or matte |
| Farbe | Glossy black, matte black, carbon fiber glossy black, carbon fiber matte black, carbon fiber red |
| Pattern / Weave | Carbon fiber pattern or plain black |
| Installation Type | 3M double-sided adhesive |
| Lieferumfang | Stalk cover with 3M adhesive and cleaning kit |
| Versandgewicht | 50 g (0.11 lb) |
What's in the Box
- 1×ABS turn signal stalk cover with 3M double-sided adhesive
- Cleaning kit
Installation
- Park securely and dry-fit the cover to the original turn signal stalk.
- Clean and dry the bonding surface using compatible preparation products. Follow the adhesive instructions for the actual surface and temperature.
- Peel the liner, align the cover and press along the bonding area for at least the stated 60 seconds.
- Keep the bonded area dry for the stated 24-hour period, subject to the actual adhesive cure instructions.
Gut zu wissen
Achtung
- Fits the original physical turn signal stalk only; does not fit stalkless vehicles or different aftermarket stalks.
- Keep the bonded area dry during the adhesive cure period.
Pflege
- Keep the stalk movement and controls unobstructed. Stop using the cover if it shifts or interferes with operation.
FAQ
Will this add a stalk to a stalkless car?
No. It is an adhesive shell for an existing matching physical indicator stalk, not an electrical control or stalk retrofit.
How do I prepare the surface?
Dry-fit first, then clean and dry compatible bonding surfaces with the preparation kit.
What finishes are available?
Carbon fiber texture in glossy black, matte black or red, plus plain glossy black and matte black. The patterned versions are ABS, not structural carbon fiber.
English 
German 
Spanish 