Carbon Fiber Center Console Wrap Panels with Matte, Glossy & Forged Finishes for Tesla Model 3 / Model Y

Carbon Fiber Panels Shaped for Your Console Generation

These model-specific carbon-fiber panels cover the original center-console trim. Choose the console generation first, then the material and finish offered for that generation. Dry Carbon Fiber and Real Carbon Fiber are the listing's option names; both are carbon-fiber materials. A cleaning wipe and adhesion promoter are included.

3 Console Generations
Dry or Real Carbon
Matte, Glossy, Forged
Peel-and-Stick
Promoter Included

Hauptmerkmale

Three Console Generations

Separate sets for Gen.1, Gen.2 and Gen.3 follow the lid seams and openings of each console
Dry Carbon Option

Made with dedicated molds and carbon fiber sheet material, with punched features shaped for the console
Real Carbon option

Directly press-formed carbon-fiber plate, described as more brittle than the Dry Carbon option.
Matte, Glossy or Forged

Gloss catches more light, matte is quieter and forged shows a flake-like pattern on Gen.2 dry carbon
Key-Card Slot Retained

Gen.1 and Gen.2 panels keep the intended key-card opening
Adhesion Promoter Included

The box includes a cleaning wipe and an adhesion promoter for the bond
Peel-and-Stick Install

Panels fit over the original trim without removing console parts or drilling holes

Highlights

Shaped for Your Console - TESVX Center Console Wrap Cover — Shaped for Your Console

Two- or three-piece sets follow the lid seams and openings of the selected generation, and the Gen.1 and Gen.2 sets retain the key-card opening.

Two Carbon Options - TESVX Center Console Wrap Cover — Two Carbon Options

Dry Carbon Fiber uses dedicated molds and sheet material. The Real Carbon Fiber option uses directly press-formed plate and is described as more brittle. Finish availability depends on the selected generation.

Finish Choices - TESVX Center Console Wrap Cover — Finish Choices

Gloss catches more light, matte creates a quieter reflection, and forged uses an irregular, flake-like pattern available on Gen.2 dry carbon.

Adhesive Install Kit - TESVX Center Console Wrap Cover — Adhesive Install Kit

A cleaning wipe and an adhesion promoter are supplied, and no console disassembly or drilling is required.

Kompatibilität

Modell	Years / Version	Hinweise
Model 3 (Gen.1)	2017-2020	3 panels; key-card slot retained
Model 3 and Model Y (Gen.2)	Model 3 2021-2023.10, Model Y 2020-2024	2 panels; key-card slot retained
Model 3 Highland and Model Y Juniper (Gen.3)	Gen.3 console layout	Highland/Juniper; 3 panels, no earlier card-slot opening; option labeled 2024+

Gen.1 fits Model 3 2017-2020; Gen.2 fits Model 3 2021-2023.10 and Model Y 2020-2024; Gen.3 fits Model 3 Highland and Model Y Juniper. LHD/RHD are listed within each console version. Does not fit Model YL.

Technische Daten

Produkttyp	Carbon fiber center console wrap cover panel set
Compatible Models	Gen.1: Model 3 2017–2020; Gen.2: Model 3 2021–2023.10 / Model Y 2020–2024; Gen.3: Highland / Juniper console layout
Position / Location	Center console, over the original trim
Material	Dry carbon fiber (dedicated molds and sheet material) or Real carbon fiber (press-formed plate)
Surface Finish	Matte, Glossy or Forged (forged: Gen.2 dry carbon only)
Menge	3 panels (Gen.1), 2 panels (Gen.2), 3 panels (Gen.3)
Installation Type	Adhesive peel-and-stick; no console disassembly or drilling
Hand Drive (LHD/RHD)	Compatible with left- and right-hand-drive vehicles
Lieferumfang	Console cover set, cleaning wipe and adhesion promoter
Versandgewicht	188 g (0.41 lb)

What's in the Box

1×Console cover set (3 panels for Gen.1, 2 panels for Gen.2, 3 panels for Gen.3)
1×Cleaning wipe
1×Adhesion promoter

Installation

Difficulty: Moderate
Werkzeuge: Included cleaning wipe and adhesion promoter

Remove dust, oils, wax and silicone residue, then clean and completely dry the original surface.
Dry-fit every panel with the adhesive liner on.
Use the supplied adhesion promoter according to its directions.
Lower each panel from one edge and apply even pressure.
Leave the bond undisturbed during the initial set period.

Gut zu wissen

Achtung

The real carbon fiber option is more brittle than the dry carbon option.
Removal may leave residue.
Avoid water, cleaners and lifting the edges during the initial adhesive-set period.
Model YL is not listed.

Pflege

Removal depends on adhesive age, temperature and the original surface, and residue is possible.

FAQ

How do I tell Gen.1, Gen.2 and Gen.3 apart?

Gen.1 uses the earlier three-section console layout, Gen.2 uses the updated two-section sliding console, and Gen.3 matches the refreshed Highland and Juniper three-section layout.

Can I reposition a panel?

Repeated lifting can contaminate or weaken the adhesive.

Will removal leave the original surface unchanged?

It depends on adhesive age, temperature and the original surface. Residue or a change to the finish is possible.

Does it fit the Model YL?

No. The Model YL is not listed.

Which finishes are offered for each generation?

Dry Carbon Matte and Glossy are listed for all three generations; Dry Carbon Forged is Gen.2 only. Real Carbon Matte is Gen.2/Gen.3; Real Carbon Glossy is Gen.3 only.