Carbon Fiber for the Display Back
Finish the rear of your center display with a two-piece dry carbon fiber shell. Available per display version in matte, glossy or glossy forged, with the original front touchscreen left open.
- Dry Carbon Fiber
- Two-Piece Rear Shell
- Three Finish Choices
Hauptmerkmale
-
Rear Display Styling
Add carbon fiber to the back of the center display while keeping the front touch surface open.
-
Two-Piece Shell
Separate upper and lower sections fit around the existing display rear housing.
-
Three Finishes
Choose Matte Carbon Fiber, Glossy Carbon Fiber or Glossy Forged Carbon Fiber.
-
Version-Specific Profile
Select the vehicle group that matches your display housing and support arrangement.
-
Slide and Hook Installation
The upper section slides over the display and the lower section hooks on, with adhesive fixing.
-
Retain Original Functions
Keep ventilation, sensors, the mounting support and all display movement clear during fitting.
Highlights
Two-Piece Rear Shell
The separate shell sections follow the back of the display and fit around its support area.
Installed Carbon Appearance
The rear cover gives the display housing a woven carbon finish. Installation is on the housing exterior, with the original display and mounting support retained.
Choose the Correct Version
Select the exact vehicle group and finish in the options. Different display profiles need their matching shell; a shared vehicle name does not make every version interchangeable.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Choose the shared Model 3 2017–2023 & Model Y 2020–2024 option. |
| Model Y | 2020–2024 | Choose the shared Model 3 2017–2023 & Model Y 2020–2024 option. |
| Model 3 Highland | 2024+ | Choose the Highland option. |
| Model Y Juniper & Model YL | 2026+ option | Choose the Juniper & YL option. |
Technische Daten
| Produkttyp | Two-piece center display back cover |
|---|---|
| Compatible Models | Model 3 2017–2023 / Model Y 2020–2024; Model 3 Highland 2024+; Model Y Juniper & Model YL 2026+ options |
| Position / Location | Exterior of the center display rear housing |
| Material | Dry carbon fiber |
| Surface Finish | Matte Carbon Fiber; Glossy Carbon Fiber; Glossy Forged Carbon Fiber |
| Farbe | Carbon weave or forged carbon appearance, according to finish |
| Menge | 2 shell pieces: upper and lower |
| Installation Type | Slide/clip-on rear shell with adhesive fixing; follow the selected version instructions |
| Versandgewicht | 127 g (0.28 lb) |
What's in the Box
- 2×display back cover shell pieces
Installation
- Park the vehicle. Hold both shell sections against the original rear housing before removing any adhesive liner. Do not dismantle the display or its mount.
- Clean and dry the housing surfaces. Slide on the upper piece and hook on the lower piece, then apply its adhesive fixing without pressing on the touchscreen.
- Follow the adhesive curing instructions.
Gut zu wissen
Achtung
- Keep the touchscreen face, ventilation slots, sensors, cable routes and original mounting support clear. Stop fitting if the cover binds, changes display movement or obstructs an opening.
Pflege
- Clean with a soft cloth and a finish-compatible product. Avoid abrasive pads, harsh solvents and applying coatings to vents or the touch surface.
FAQ
Does this cover the touch surface?
This shell is for the rear housing exterior. Keep the touchscreen face completely open; it is not a film or glass protector applied to the touch surface.
Which finishes are available?
Matte Carbon Fiber, Glossy Carbon Fiber and Glossy Forged Carbon Fiber are separate finish choices for each vehicle group.
Will one version fit every Model 3 or Model Y display?
Choose the matching vehicle group and rear display profile.
How should I remove the shell later?
Support the housing and release the adhesive without levering against the glass or mount; adhesive removal can leave residue or affect the original finish.
English 
German 
Spanish 