X-Style LED Tail Light Set for Model 3 and Model Y
Replace the rear lamp sections with an X-shaped LED pattern, a scanning position-light effect and progressive turn signals. The set includes left and right lamp groups with a dedicated wiring kit, offered in original-body Model 3 and Model Y versions.
- X-Style Pattern
- Integrated LEDs
- Left and Right Set
- Red or RGB
Hauptmerkmale
-
X-Style LED Pattern
The rear lamp sections use an illuminated X-shaped design.
-
LED Light Sources
Integrated LEDs replace the original lamp sections without separate bulb selection.
-
Sequential Effects
The lamps provide a scanning position-light effect and progressive turn-signal pattern.
-
Left and Right Set
The kit pairs the body-side and trunk-side lamp sections for both rear corners.
-
Wiring Kit
Model-specific adapters connect the replacement lamp sections to the original connectors.
-
Red or RGB Version
Select the model and lighting version; the RGB option is labelled Banned on AU roads.
Highlights
X-Shaped Rear Pattern
The LED sections form an X-shaped pattern across the body-side and trunk-side lamps.
Left and Right Lamp Groups
The set includes left and right rear lamp groups and a wiring kit.
Scanning and Progressive Effects
Position-light scanning and progressive turn-signal effects add an animated pattern. Brake and reversing-light outputs must operate correctly with your vehicle wiring.
Choose the Lighting Version
Red and RGB are separate purchase options. The RGB option is labelled Banned on AU roads; colored display effects do not establish approval for public-road use.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2021–2023.10 | Original rear lamp layout. Does not fit Highland. |
| Model Y | 2021–2025.03 | Original rear lamp layout. Does not fit the Juniper light-bar design. |
Fits Model 3 2021–2023.10 and Model Y 2021–2025.03 with the original rear lamp layout. Does not fit Highland or Juniper. US-built cars are listed with red turn signals and Shanghai/Berlin-built cars with amber signals.
Technische Daten
| Produkttyp | X-treme LED tail light set |
|---|---|
| Compatible Models | Original-body Model 3 2021–2023.10 / Model Y 2021–2025.03; fits the original lamp layout |
| Position / Location | Rear body-side and trunk-side lamp sections |
| Farbe | Red / RGB (Banned on AU roads) |
| Menge | Left and right rear lamp groups |
| Light Source | LED |
| Lighting Modes | Scanning position-light effect, brake illumination, progressive turn signals and reversing-light function |
| Installation Type | Replacement lamp sections with model-specific wiring adapters |
| Versandgewicht | 4,000 g (8.82 lb) |
What's in the Box
- 1×Left and right tail light set
- Model-specific wiring kit
- Installation instruction
Installation
- Use the wiring guide for the selected kit.
- Use the vehicle-specific removal procedure to access trim and fasteners. Release connector locks before disconnecting; do not pull wiring or pry against the lens.
- Fit the lamp sections and matched adapters without forcing connectors. Fit the grommets and seals, secure the wiring clear of hinges and reseat the trunk seal.
Gut zu wissen
Achtung
- The RGB purchase option is labelled Banned on AU roads. Use colored display effects only where permitted; neither Red nor RGB is a guarantee of road approval or inspection acceptance.
- Preserve all original required rear-light functions and reflectors, including rear fog lights where fitted. Do not bypass warning faults or drive with incorrect lamp outputs.
Pflege
- Keep the lenses clean with a surface-compatible method; avoid abrasive cleaners.
FAQ
Which rear lamp layouts does it fit?
Fits the original-body Model 3 2021–2023.10 and Model Y 2021–2025.03. Does not fit Highland or Juniper rear designs.
What comes in the set?
Left and right rear lamp groups, a model-specific wiring kit and installation instruction. Obtain the correct guide if it is not supplied.
Does the Red option mean the turn signals are red?
Red identifies the purchase version. Turn-signal output depends on the supplied market version: US-built cars are listed with red signals, while Shanghai/Berlin cars use amber.
Can I use RGB effects on Australian roads?
No. The RGB option is labelled Banned on AU roads.
What is tested after installation?
Test all original required rear-light functions, correct signal colors, warnings, secure mounting, seals and trunk movement. Retain rear fog-light function where fitted; the kit is not a basis for adding or deleting a required function.
English 
German 
Spanish 