Dry Carbon Fiber Door Trim Covers for the Cybertruck
Four dry carbon fiber covers for the matching inner door trim of the Tesla Cybertruck. The shaped pieces attach over the original trim with pre-applied double-sided adhesive. Choose Glossy or Matte, then test-fit each cover before peeling the backing.
- Dry Carbon Fiber
- 4-Piece Set
- Pre-Applied Adhesive
- Glossy or Matte
Hauptmerkmale
-
Dry Carbon Fiber Trim
A visible carbon weave adds a decorative layer to the existing inner door trim
-
Four-Piece Set
Four shaped door-trim covers are supplied as one set
-
Glossy or Matte
Choose the reflective Glossy finish or lower-sheen Matte finish
-
Existing Panels Retained
The covers attach over the matching door-trim surfaces without replacing the panels
-
Pre-Applied Adhesive
Double-sided adhesive strips are fitted to the back of the covers
Highlights
Inner Door Trim Placement
The fitted example shows the cover on the existing inner door-trim strip.
Carbon Weave Detail
The close-up illustrates the carbon finish and long shaped trim pieces. Choose Glossy or Matte in the product options.
Door-Panel View
The covers add a decorative layer while the original panels remain in place.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Tesla Cybertruck | Four inner door-trim covers |
Technische Daten
| Produkttyp | Door panel trim covers (4-piece set) |
|---|---|
| Compatible Models | Tesla Cybertruck |
| Position / Location | Door trim |
| Material | Dry carbon fiber with a UV-protected surface |
| Surface Finish | Glossy or Matte |
| Menge | 4 pieces |
| Installation Type | Pre-applied double-sided adhesive strips; no tools |
| Care Instructions | Keep the adhesive area dry for at least 24 hours after fitting |
What's in the Box
- 4×Door panel trim covers
Installation
- Clean the existing door-trim surfaces so they are dry and free of dust or grease.
- Peel the backing from the pre-applied strips, align the cover and press evenly for at least 30 seconds.
- Keep the bonded area dry for at least 24 hours before washing or exposing it to moisture.
Gut zu wissen
Achtung
- The adhesive is strong; remove covers carefully and allow for possible residue.
- Keep the bonded area dry for at least 24 hours after fitting.
Pflege
- Clean the carbon surface gently and avoid abrasive rubbing.
FAQ
Is it dry carbon fiber?
The covers are made from dry carbon fiber with a UV-protected surface. Glossy and Matte finishes are available.
Can it be removed later?
The adhesive forms a strong bond. Remove carefully using a method suitable for the original trim; residue may remain.
How long should I wait before washing?
Keep the bonded area dry for at least 24 hours before washing or exposing it to moisture.
How many pieces come in the pack?
Four door panel trim covers.
English 
German 
Spanish 