A Dry Carbon Fiber Frame for the Model S and X Display
A dry molded carbon fiber overlay for the original vertical center display frame of the Tesla Model S 2014-2020 and Model X 2015-2020. It adds a visible carbon weave around the screen while retaining the existing frame. Available in Glossy or Matte.
- Dry Molded Carbon
- Glossy or Matte
- Vertical Display Frame
- Peel-and-Stick
Hauptmerkmale
-
Dry Molded Carbon Fiber
A visible carbon weave accents the existing display-frame surface
-
Vertical Display Frame
Shaped around the original upright center display
-
Glossy or Matte
Choose the reflective glossy finish or a lower-sheen matte finish
-
Adhesive Overlay
Fits over the existing frame with peel-and-stick attachment
-
Existing Frame Retained
Adds a trim layer without replacing the screen or its original frame
-
Coated Finish
The carbon surface has a UV-resistant coating; clean it gently to preserve the finish
Highlights
Around the Vertical Display
The installed example shows the carbon overlay along the upright display frame. It is a decorative trim layer over the original frame.
Shaped Frame Overlay
Shaped to the lower edge and sides of the existing display frame.
Glossy or Matte
Choose the finish in the product options. The installed photos illustrate the Glossy appearance.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model S | 2014-2020 | Original vertical center display frame |
| Model X | 2015-2020 | Original vertical center display frame |
Fits the vertical display layout only. Does not fit the later horizontal display.
Technische Daten
| Produkttyp | Center display frame dry carbon fiber overlay |
|---|---|
| Compatible Models | Model S 2014-2020 and Model X 2015-2020; original vertical display frame required |
| Position / Location | Center display frame |
| Material | Dry molded carbon fiber with a UV-resistant coating |
| Surface Finish | Glossy or Matte |
| Installation Type | Peel-and-stick adhesive over the existing frame |
| Versandgewicht | 1.8 kg (3.97 lb) |
Installation
- Clean and dry the center display frame.
- Test the overlay against the frame for alignment.
- Peel the backing from the adhesive and press the overlay firmly into place.
Gut zu wissen
Achtung
- Adhesive removal may leave residue.
FAQ
Which years does it fit?
Model S 2014-2020 and Model X 2015-2020 with the original vertical display frame.
What is it made of?
Dry molded carbon fiber with a UV-resistant coating.
How is it installed?
The overlay attaches over the existing frame with peel-and-stick adhesive. Test the alignment before peeling the backing.
What finishes can I choose?
Glossy or Matte.
English 
German 
Spanish 