A Rotating Mount for Your Center Screen
This screen swivel rotating mount kit is made for the center screen of Tesla Model 3 and Model Y, including Highland, Juniper and YL, and it fits both LHD and RHD vehicles. The rotation function works after installation, so keep the kit unrotated until it is fitted.
- Rotating Mount
- LHD & RHD
- Model 3 & Model Y
- Highland / Juniper / YL
Hauptmerkmale
-
Screen Swivel
The mount allows adjustment of the center display after installation.
-
Drive-Side Fit
The kit is offered for left-hand and right-hand drive vehicles in the listed model groups.
-
Aluminum Bracket
The component diagram identifies the mount bracket as aluminum alloy.
-
ABS Trim Pieces
The component diagram identifies the surrounding trim as ABS plastic.
-
Two Vehicle Groups
Select the earlier Model 3/Y kit or the Highland, Juniper and YL kit.
-
Keep Unrotated
Do not rotate the mount before it is installed; the product instructions warn that doing so makes it unusable.
Highlights
Adjust the Installed Display
The installed side view shows the rotating mount behind the display. Adjust the screen after fitting.
Bracket and Trim Components
The component diagram identifies an aluminum-alloy bracket and ABS trim pieces, with fitting tools pictured alongside.
Choose the Matched Vehicle Kit
The earlier Model 3/Y kit and the Highland, Juniper and YL kit are separate purchase options. The mount rotates only after installation.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | LHD and RHD |
| Model Y Juniper | 2025+ | LHD and RHD |
| Model YL | 2026+ | LHD and RHD |
| Model 3 | 2017–2023.08 | LHD and RHD |
| Model Y | 2020–2025.03 | LHD and RHD |
Fits Model 3 2017–2023.08, Model 3 Highland 2024+, Model Y 2020–2025.03, Model Y Juniper 2025+ and Model YL 2026+, in LHD and RHD versions.
Technische Daten
| Produkttyp | Screen swivel rotating mount kit |
|---|---|
| Compatible Models | Model 3 Highland (2024+), Model Y Juniper (2025+), Model YL (2026+), Model 3 (2017–2023.08), Model Y (2020–2025.03) |
| Position / Location | Center display mount |
| Material | Aluminum-alloy bracket and ABS trim pieces |
| Hand Drive (LHD/RHD) | Fits both LHD and RHD |
| Versandgewicht | 1,250 g (2.76 lb) |
Installation
- Keep the new mount unrotated until it is installed.
- Support the screen and its cable during removal and mounting.
- Fit the matched bracket and trim, avoiding trapped or stretched wiring.
- The swivel works only after installation.
Gut zu wissen
Achtung
- The screen mount kit cannot be used once it has been rotated prior to installation.
- Set the screen angle while parked and keep the display from obstructing your view of the road.
- Keep connectors supported and avoid trapping or stretching the display cable.
Pflege
- Adjust the screen while parked and avoid forcing it beyond the mount travel.
- Recheck fastener security and cable clearance after fitting.
FAQ
Can I rotate the mount prior to installing it?
No. Once the kit has been rotated prior to installation, the product cannot be used. The rotation function works only after installation.
Does it fit left-hand and right-hand drive?
Yes. The kit fits both LHD and RHD vehicles.
English 
German 
Spanish 