Split-Design Side Skirts for the Model Y Juniper
These ABS side skirts use two sections per side, joined into left and right assemblies for the Model Y Juniper body introduced from March 2025. Four black or carbon-pattern finishes are available. Mounting uses the supplied self-tapping screws and requires permanent holes in the intended lower plastic rocker panels.
- 4 Skirt Sections
- ABS Plastic
- 4 Finishes
- Drilling Required
Hauptmerkmale
-
Four-Section Set
Two sections join together on each side to form the left and right skirts.
-
ABS Construction
Side skirts use ABS plastic; the carbon-pattern choices describe the surface finish.
-
Four Finish Choices
Glossy black, matte black, glossy carbon pattern and matte carbon pattern are available.
-
Joined Before Mounting
Short screws connect the sections before each complete side is positioned.
-
Drilling Required
Supplied self-tapping screws attach the skirts to the intended lower plastic rocker panels.
-
Juniper Body Profile
Shaped to the Juniper rocker contour and wheel-well ends.
Highlights
Two Sections Per Side
The joining-point illustration shows how the split pieces form a complete side skirt. Assemble the left and right sides with the short screws before positioning them on the car.
Lower Rocker Profile
The skirt shapes follow the lower rocker area and extend toward the wheel-well ends.
Four Surface Finishes
Select glossy black, matte black, glossy carbon pattern or matte carbon pattern. The carbon-pattern options are ABS skirts with a patterned finish.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | March 2025 onward | Lower rocker and wheel-well ends; does not fit legacy Model Y. |
These skirts require drilling and add material below the rocker, reducing ground clearance.
Technische Daten
| Produkttyp | Split-design side skirts |
|---|---|
| Compatible Models | Tesla Model Y Juniper, March 2025 onward |
| Position / Location | Lower exterior plastic rocker panels, left and right |
| Material | ABS plastic |
| Farbe | Glossy Black; Matte Black; Glossy Carbon Pattern; Matte Carbon Pattern |
| Menge | 4 skirt sections: 2 per side |
| Installation Type | Section assembly followed by self-tapping screw mounting |
| Drilling Required | Yes, into the intended lower plastic rocker panels |
What's in the Box
- 4×Side skirt sections (2 per side)
- Self-tapping mounting screws
- Short section-joining screws
Installation
- The skirts fix to the lower plastic rocker panels; lifting points stay accessible.
- Pair the correct two sections for each side and join them with the short screws at the intended connection points.
- Dry-fit both assemblies, then mark the mounting locations.
- Install only through the intended plastic panels with the correct self-tapping screws and product guidance. Do not guess screw length or drill into underlying structural, battery or electrical components.
Gut zu wissen
Achtung
- Drilling makes permanent holes.
- Do not drill into structural metal, the battery enclosure, wiring or lines; preserve the vehicle lifting points.
- These skirts are for the Juniper body profile and are not intended for the legacy Model Y.
- Stop using the vehicle with a loose or damaged skirt until the mounting has been corrected.
Pflege
- Clean with pH-neutral car soap and a soft cloth; avoid directing a high-pressure jet at edges and joins.
FAQ
Does installation require drilling?
Yes. The set uses self-tapping screws in the intended lower plastic rocker panels. This makes permanent holes.
How many skirt pieces are included?
Four skirt sections form one left side and one right side. Self-tapping mounting screws and short section-joining screws are included; individual screw counts are not provided.
Are the carbon-pattern options made from carbon fiber?
These are ABS side skirts. Glossy and matte carbon pattern describe the finish.
Can I use them with mud flaps?
Clearance to mud flaps varies by flap shape.
English 
German 
Spanish 