Black Rubber Guards for Selected Door-Edge Positions
Add a raised rubber layer at selected door-edge contact points on Model 3, Model Y, Model S or Model X. The black individual guards attach with 3M adhesive backing without drilling.
- Black Rubber
- 3M Adhesive
- Individual Guards
- No Drilling
Hauptmerkmale
-
Rubber Guards
Flexible black guards add a raised contact layer at selected door-edge positions.
-
Adhesive Backing
Attach with 3M adhesive backing after cleaning and trial fitting.
-
Local Edge Coverage
The pictured set uses individual guards rather than a continuous full-length strip.
-
Black Finish
Black pieces add visible accents at the chosen mounting points.
-
Model 3/Y/S/X Use
Listed for Model 3, Model Y, Model S and Model X.
-
Peel-and-Stick Fitting
Fit without drilling, then keep the guards dry for 24 hours.
Highlights
Flexible Rubber Pieces
The black rubber guards have a flexible profile and provide local coverage at the chosen mounting points.
Peel-and-Stick Attachment
Trial-fit each guard, clean and dry the contact area, then expose the adhesive and press firmly.
Visible Edge Accents
Individual black pieces follow selected door-edge positions. They are local guards rather than a full-length wrap.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Tesla Model 3 | Suitable edge shape and closing clearance required. | |
| Tesla Model Y | Suitable edge shape and closing clearance required. | |
| Tesla Model S | Suitable edge shape and closing clearance required. | |
| Tesla Model X | Suitable edge shape and closing clearance required. |
Technische Daten
| Produkttyp | Rubber door edge protection guards |
|---|---|
| Compatible Models | Model 3, Model Y, Model S and Model X |
| Position / Location | Selected door-edge positions |
| Material | Gummi |
| Farbe | Schwarz |
| Menge | 1 set of individual edge guards |
| Installation Type | 3M adhesive backing, peel and stick |
| Installation Time | Approx. 30–45 minutes fitting; keep dry for 24 hours |
| Lieferumfang | 1 set of door edge guards and installation instructions |
| Versandgewicht | 100 g (0.22 lb) |
What's in the Box
- 1×Set of individual door-edge guards
- Fitting instructions
Installation
- Plan each position and trial-fit the guards for edge shape and door clearance.
- Clean and dry the contact areas with a cleaner compatible with the original finish; work above approx. 10°C (50°F).
- Peel a small section of the 3M adhesive liner and align each guard with its planned position.
- Continue exposing the liner and pressing the guard into place; press each section firmly for 60 seconds.
- Keep the guards dry for 24 hours.
Gut zu wissen
Achtung
- Rubber guards cover only the mounting points and do not guarantee prevention of dents, scratches or paint damage.
- Install above approx. 10°C (50°F), press each section for 60 seconds and keep dry for 24 hours.
- Adhesive removal may leave residue or affect paint. Use cleaners and removal methods compatible with the finish.
Pflege
- Clean with mild soap and water and avoid harsh chemicals or solvents.
- Press the edges down again if they lift.
FAQ
Are these continuous edge strips?
The product images show individual rubber guards for selected mounting points.
Which Tesla models are they listed for?
Model 3, Model Y, Model S and Model X.
How long should I keep them dry?
Keep them dry for 24 hours after fitting.
Will they prevent all door-edge damage?
They add rubber coverage at the mounting points. They do not guarantee prevention of dents, scratches or paint damage; continue to open doors carefully.
English 
German 
Spanish 