TESVXtesvx.com
Quelle: https://tesvx.com/de/product/tesla-model-y-a-pillar-mirror-trim/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypAftermarket direct replacement, not manufactured or endorsed by Tesla
Vehicle CompatibilityModel Y 2020-2025; Model Y Juniper 2025+; Not for Performance / Standard / YL
MaterialABS
InstallationsmethodeSnap-in clips, basic plastic trim tool, under 10 minutes
SideLeft (LH) - 1495632-00-A / Right (RH) - 1495633-00-A / Pair (LH + RH) - 1495632-00-A+1495633-00-A
VersandgewichtLeft (LH) - 1495632-00-A / Right (RH) - 1495633-00-A: 200 g (0.44 lb); Pair (LH + RH) - 1495632-00-A+1495633-00-A: 400 g (0.88 lb)
OE Reference Numbers1495632-00-A (LH) / 1495633-00-A (RH)

Details

Replacement Mirror-Corner Applique for Model Y

Replace the triangular exterior trim beside the front-door mirror with a side-specific ABS applique. Choose Left, Right or Pair using OE references 1495632-00-A and 1495633-00-A. This is an aftermarket part.

  • ABS Applique
  • Left or Right
  • Pair Option
  • OE References

Hauptmerkmale

  1. Mirror-corner replacement

    A triangular exterior applique replaces the matching piece next to the front-door mirror.

  2. Side-specific references

    LH corresponds to 1495632-00-A and RH to 1495633-00-A.

  3. Three purchase options

    Left TTR001-L, Right TTR001-R or Pair TTR001.

  4. ABS construction

    A formed black ABS panel follows the mirror-corner profile.

  5. Retention tabs

    Molded tabs attach the matched applique at the original mirror mounting locations.

  6. Vehicle-specific service

    Replacement access and reassembly follow the procedure for the actual vehicle and door mirror.

Highlights

Triangular Mirror-Corner Profile - TESVX A-Pillar Mirror Trim
Triangular Mirror-Corner Profile

The formed applique occupies the triangular corner beside the exterior door mirror. The appearance photograph identifies the part’s location.

Molded Retention Tabs - TESVX A-Pillar Mirror Trim
Molded Retention Tabs

The replacement has molded tabs for the matching mirror assembly. Install through the vehicle-specific access procedure and seat every tab without forcing or damaging the adjoining seals and trim.

Select One Side or the Pair

Left TTR001-L corresponds to reference 1495632-00-A; Right TTR001-R to 1495633-00-A. Pair TTR001 contains one of each side. OE references identify the matching application and do not make the part an original Tesla component.

Kompatibilität

Modell Years / Version Hinweise
Model Y 2020–2025 LH1495632-00-A / RH1495633-00-A; listed trim exclusions apply.
Model Y Juniper 2025+ LH1495632-00-A / RH1495633-00-A; listed trim exclusions apply.

Does not fit Performance, Standard or YL.

Technische Daten

Produkttyp Aftermarket A-pillar mirror-corner applique replacement
Compatible Models Listed Model Y 2020–2025 and Juniper 2025+; not Performance, Standard or YL
Position / Location Exterior front-door mirror corner; LH or RH
Material ABS
Menge Left or Right option: 1 applique; Pair option: 2 appliques
OEM Part Number OE references only: LH 1495632-00-A; RH 1495633-00-A
Installation Type Replacement following the mirror and door service procedure
Versandgewicht 200 g for a single side; 400 g for Pair

What's in the Box

  • Selected Left or Right option: 1 x matching-side applique
  • Selected Pair option: 2 x appliques, one LH and one RH

Installation

Difficulty
Advanced
Werkzeuge
Trim tools
  1. Open the corresponding door and lower its window.
  2. Access is through the relevant door trim, lighting/tweeter and mirror assembly. Support components and disconnect wiring correctly rather than prying the outside applique as a shortcut.
  3. Release the original retention tabs from the mirror assembly and install the matching replacement, fully seating each tab and its adjoining edge without damaging seals.
  4. Reassemble the mirror and door components with the original fasteners and connectors.

Gut zu wissen

Achtung
  • Does not fit Performance, Standard or YL configurations.
  • Access can require door trim, lighting/tweeter and mirror removal; do not pry the exterior piece away as a shortcut.
  • Lower the corresponding window before the applicable door service, support trim and mirror parts, and protect wiring, clips and seals. Follow the correct connector and fastener instructions.
Pflege
  • Clean with a soft cloth and finish-compatible car-wash product. Avoid levering against the edges or directing a close pressure-washer jet into the joints.
  • Persistent wind noise can have other causes; the applique does not eliminate every wind noise.

FAQ

Is it an original Tesla part?

No. It is an aftermarket replacement using OE references 1495632-00-A for LH and 1495633-00-A for RH to identify the matching application.

What do the three purchase options contain?

Left TTR001-L contains one LH applique; Right TTR001-R one RH applique. Pair TTR001 contains one LH and one RH applique.

Can I replace it by prying from outside?

No. Access involves the mirror and associated door components.

Which configurations are excluded?

Performance, Standard and YL configurations, including within the listed year ranges.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Aftermarket direct replacement, not manufactured or endorsed by Tesla
Vehicle Compatibility
Model Y 2020-2025; Model Y Juniper 2025+; Not for Performance / Standard / YL
Material
ABS
Installationsmethode
Snap-in clips, basic plastic trim tool, under 10 minutes
Side
Left (LH) - 1495632-00-A / Right (RH) - 1495633-00-A / Pair (LH + RH) - 1495632-00-A+1495633-00-A
Versandgewicht
Left (LH) - 1495632-00-A / Right (RH) - 1495633-00-A: 200 g (0.44 lb); Pair (LH + RH) - 1495632-00-A+1495633-00-A: 400 g (0.88 lb)
OE Reference Numbers
1495632-00-A (LH) / 1495633-00-A (RH)

Bewertung schreiben

ABS A-Pillar Mirror Trim 1495632 / 1495633 with Snap-In Clips for Tesla Model Y / Model Y Juniper
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
ABS A-Pillar Mirror Trim 1495632 / 1495633 with Snap-In Clips for Tesla Model Y / Model Y Juniper

Preisspanne: US$29.99 bis US$54.99

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden