Real Dry Carbon Fiber for the Lower Cybertruck Mirror Housing
This cover is molded from genuine dry molded carbon fiber for the lower part of the Tesla Cybertruck side mirror housing, for 2024-on vehicles. It has a classic 2×2 twill weave in a glossy or matte finish, and pre-applied double-sided tape means no modification to the original parts or the vehicle body.
- Dry Molded Carbon
- 2×2 Twill Weave
- Glossy or Matte
- Cybertruck 2024+
- Pre-Applied Tape
Hauptmerkmale
-
Dry Molded Carbon Fiber
Built from genuine dry molded carbon fiber that is strong yet lightweight
-
2×2 Twill Weave
The classic 2×2 twill weave pattern shows the carbon fiber character
-
Glossy or Matte
Choose the reflection level that matches your preferred exterior trim look.
-
Custom Mirror Fit
Molded for the lower part of the Cybertruck side mirror housing, for 2024-on vehicles
-
Pre-Applied Tape
Double-sided tape is already on the back, so no modification to parts or body is needed
-
Clear Install Steps
Dry-fit first, then press firmly for at least 60 seconds so the tape adheres completely
-
Cure Guidance
Avoid washing or large amounts of moisture for 24-48 hours after installation
Highlights
Genuine Dry Carbon
Genuine dry molded carbon fiber gives strength while staying lightweight.
Two Finishes
The classic 2×2 twill weave is available with a glossy or matte finish.
No Modification
The cover attaches with pre-applied double-sided tape, so there is no need to modify original parts or the body.
Tape-Backed Fitting
The trim bonds over the original mirror housing with the pre-applied adhesive.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Tesla Cybertruck | 2024+ | Lower part of the side mirror housing |
Fits Cybertruck 2024 onward.
Technische Daten
| Produkttyp | Side mirror bottom cover in dry carbon fiber |
|---|---|
| Compatible Models | Tesla Cybertruck 2024+ |
| Position / Location | Lower part of the side mirror housing |
| Material | Genuine dry molded carbon fiber |
| Surface Finish | Glossy or Matte |
| Pattern / Weave | 2×2 twill weave |
| Installation Type | Pre-applied double-sided tape; no modification to original parts |
What's in the Box
- Dry Carbon Fiber Mirror Housing Trim (selected finish)
Installation
- Clean the installation area of the original side mirror cover.
- Peel off the pre-applied double-sided tape liner on the back of the cover.
- Precisely align the cover to the lower mirror housing and apply firm pressure for at least 60 seconds so the tape adheres completely.
- Avoid car washing or large amounts of moisture for 24-48 hours after installation.
Gut zu wissen
Achtung
- Dry-fit the trim before peeling the adhesive liner.
- Avoid washing or large amounts of moisture for 24–48 hours after installation.
FAQ
Is it real carbon fiber?
Yes. It is genuine dry molded carbon fiber in a 2×2 twill weave.
How do I install it?
Clean the area, peel the tape liner, align the cover to the lower mirror housing and press firmly for at least 60 seconds.
When can I wash the car?
Avoid car washing or large amounts of moisture for 24-48 hours after installation.
Does fitting require modifying the mirror?
The trim attaches with pre-applied double-sided tape without modifying the original mirror housing. Dry-fit it before bonding.
English 
German 
Spanish 