Carbon Fiber Fog Light Trim for Model 3 (2017–2023)
Add a carbon fiber accent to the front fog-light surrounds of the original Model 3. This set includes two adhesive trim pieces in Wet Carbon Fiber or Dry Carbon Fiber, with Glossy, Matte or Forged finish choices. Fits the original 2017–2023 Model 3 front bumper.
- 2 Trim Pieces
- Wet or Dry Carbon
- 3 Finish Choices
- Adhesive Fitting
Hauptmerkmale
-
Front surround styling
Adds a carbon fiber accent around the original Model 3 fog-light area.
-
Paired trim pieces
Includes a left and right piece for the front bumper.
-
Two material selections
Choose Wet Carbon Fiber or Dry Carbon Fiber in the product options.
-
Three surface choices
Glossy, Matte and Forged finishes offer different visual appearances.
-
Adhesive fitting
Applies over the matching surround without replacing the lamp assembly.
-
Outline
The two pieces follow the bumper outline.
Highlights
Left and Right Trim
The two shaped pieces follow the front fog-light surround and extend down the outer bumper edge. The lamps remain the original vehicle components.
Installed Surround Detail
Align the trim on the matching surrounding surface while leaving the entire lamp lens, sensor faces and bumper openings unobstructed.
Choose the Appearance
Select Glossy, Matte or Forged with either Wet Carbon Fiber or Dry Carbon Fiber. A woven finish and the varied Forged pattern have different appearances.
Dry Fit Before Adhesion
The pieces follow the original bumper fog-light surround. They do not fit a different lamp surround or a modified bumper.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Original front bumper and fog-light surround only. Does not fit 2024+ Highland. |
Fits the original Model 3 2017–2023 front bumper. Does not fit 2024+ Highland. This is exterior trim and does not add or replace fog lights.
Technische Daten
| Produkttyp | Carbon fiber fog light surround trim |
|---|---|
| Compatible Models | Original Model 3, 2017–2023; matching bumper and lamp profile required; not 2024+ Highland |
| Position / Location | Left and right front fog-light surrounds |
| Material | Carbon fiber; Wet Carbon Fiber or Dry Carbon Fiber selection |
| Surface Finish | Glossy, Matte or Forged |
| Menge | 2 trim pieces per set |
| Gewicht | 150 g (0.33 lb) shipping weight per variant; not a measured net product weight |
| Installation Type | Adhesive overlay |
| Lieferumfang | 2 trim pieces and 1 roll of adhesive tape |
What's in the Box
- 2×Carbon fiber fog light trim pieces
- 1×Roll of adhesive tape
Installation
- Park and clean the matching surround with a finish-compatible cleaner. Let the surface dry; follow the adhesive instructions for any coating preparation.
- Dry fit the left and right pieces with liners in place.
- Align carefully, remove liners and press each piece evenly onto the matching attachment surface.
- Keep the area dry for at least 48 hours, or longer if the adhesive instructions require.
Gut zu wissen
Achtung
- Keep the fitted area dry and avoid washing or rain for at least 48 hours; follow the adhesive instructions if they require a longer cure.
- Removal can affect coatings or paint.
Pflege
- Clean gently with a soft cloth and products suitable for the trim finish. Avoid abrasive cleaners and direct pressure washing at adhesive edges.
FAQ
Will it fit the 2024+ Model 3 Highland?
No. It is intended for the original 2017–2023 Model 3 front bumper with the matching fog-light surround.
Does it include new fog lights?
No. The set contains two exterior trim pieces and one roll of adhesive tape; the original lamps remain in place.
What finishes can I choose?
Glossy, Matte and Forged are available with Wet Carbon Fiber or Dry Carbon Fiber. Choose the exact combination in the product options.
When can I wash the fitted area?
Keep it dry and avoid rain or washing for at least 48 hours after fitting. Follow a longer curing period if specified for the adhesive.
English 
German 
Spanish 