Choose the Generation and Reach for Your Starlink Cable Run
This Ethernet extension cable is offered for Starlink Gen 3 Standard (V3) and Gen 2 connection setups, with a copper twisted pair core and deep gray jacket. Select GEN3 IP67, GEN3 or GEN2, then choose 5 m, 23 m or 46 m. A router LAN connection and a powered dish connection have different requirements.
- Gen 3 / Gen 2 Options
- Copper Twisted Pair
- 5 / 23 / 46 m
- Deep Gray
Hauptmerkmale
-
Generation Options
Select GEN3 IP67, GEN3 or GEN2 for the intended equipment connection.
-
Three Lengths
Choose 5 m, 23 m or 46 m to suit the planned route.
-
Copper Twisted Pair
The cable uses a twisted pair copper core.
-
Shielded Connector Design
Metal shielding and plated contacts form part of the connector design.
-
Deep Gray Finish
A dark outer jacket keeps the cable appearance understated.
Highlights
Connector Configurations
The pictured cable forms illustrate a rectangular socket and a cylindrical coupling alongside shielded plug ends. One cable is supplied in the selected version.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Starlink Gen 3 Standard (V3) | GEN3 or GEN3 IP67 selection | |
| Starlink Gen 2 | GEN2 selection |
Choose the version and length together. Not for Starlink Mini.
Technische Daten
| Produkttyp | Starlink Ethernet extension cable |
|---|---|
| Compatible Models | Gen 3 Standard (V3) / Gen 2, subject to the selected cable and port configuration |
| Material | Copper twisted pair |
| Farbe | Deep gray |
| Konnektivität | Match both cable ends, port function and any powered connection requirements |
| Kabellänge | 5 m / 23 m / 46 m |
| Version | GEN3 IP67 / GEN3 / GEN2 |
Installation
Gut zu wissen
Achtung
- A network LAN port and a powered dish connection are different paths. Connector appearance alone does not show whether this cable suits a powered connection.
- The GEN3 IP67 option name does not indicate an IP rating for every version or for an incompletely assembled connection.
- Disconnect equipment power before changing a powered cable connection. Do not pull, sharply bend or crush the cable.
Pflege
- Keep connector contacts clean and dry.
- The option name does not indicate all-weather or immersion protection.
FAQ
Which versions are available?
The options are GEN3 IP67, GEN3 and GEN2.
What cable lengths can I choose?
The available lengths are 5 m, 23 m and 46 m.
Does the generation label guarantee a powered dish connection?
No. A powered dish connection needs the correct pinout, permitted load and length for that equipment. Do not treat a router LAN port and the powered dish path as interchangeable.
Is every version waterproof?
GEN3 IP67 is one version label. It does not establish the same protection for the other versions or for connections without their required seal assembly.
What network speed will I get?
Actual performance depends on the complete equipment and connection setup. No specific throughput or uninterrupted service is guaranteed here.
English 
German 
Spanish 