A Replacement Cable for Starlink Standard Actuated
This aftermarket cable is made for the Starlink Standard Actuated (Gen 2 rectangular dish) connection and is offered in six lengths from 2 to 46 m. The cable has the two dedicated connector shapes and includes two protective end caps. Choose the complete route length.
- Standard Actuated Gen 2
- 2–46 m Lengths
- 26 AWG Copper
- 2 End Caps
Hauptmerkmale
-
Gen 2 Connector Shapes
The two dedicated ends are intended for the matching Standard Actuated dish and Gen 2 equipment connection.
-
Six Cable Lengths
Select 2, 5, 10, 23, 30 or 46 m for the full planned cable route.
-
Kupferleiter
The cable uses 26 AWG copper conductor material.
-
Protective End Caps
Two caps cover the unplugged connector ends during storage or routing.
-
Whole-Cable Replacement
Choose a longer complete cable for more reach instead of assuming the plugs can join to an existing cable.
-
Route Before Connecting
Allow suitable slack and avoid tight bends, pinching or pulling on the connectors.
-
Generation Match
Both connector shapes are dedicated Gen 2 ends; this is not a general RJ45 network lead.
Highlights
Two Dedicated Plugs
The cable has a straight and an angled Gen 2-style connector, with removable end caps.
Choose the Whole Route Length
Select 2 m (6.5 ft), 5 m (16.4 ft), 10 m (32.8 ft), 23 m (75 ft), 30 m (98.4 ft) or 46 m (150 ft). Plan the complete route and suitable slack rather than assuming this cable can join directly to an existing one.
Caps for Unplugged Ends
The two caps help keep the unplugged ends protected while stored or routed. They are not covers for connected plugs and do not establish a waterproof rating for the installed system.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Starlink Standard Actuated (Gen 2) | Rectangular actuated dish; two dedicated connector shapes |
Fits the Standard Actuated dish with its original dedicated cable connection. This is not a direct RJ45 cable for Gen 3 router ports, a Mini cable or a general cable for every rectangular Starlink dish.
Technische Daten
| Produkttyp | Aftermarket replacement cable for Starlink Standard Actuated |
|---|---|
| Compatible Models | Starlink Standard Actuated, Gen 2 rectangular dish and matching dedicated equipment ports |
| Material | 26 AWG copper conductors |
| Menge | 1 cable with 2 protective end caps |
| Kabellänge | 2 m (6.5 ft) / 5 m (16.4 ft) / 10 m (32.8 ft) / 23 m (75 ft) / 30 m (98.4 ft) / 46 m (150 ft) |
| Installation Type | Whole-cable replacement using matched dedicated connectors |
Installation
- Plan the complete cable route.
- Follow the Starlink kit and supplied cable instructions, disconnecting power before changing the cable and keeping the connector ends clean and dry.
- Route without sharp bends, crushing or strain, remove the caps before connection and seat both matching plugs fully without forcing them.
- Restore power.
Gut zu wissen
Achtung
- This cable fits the Standard Actuated kit only; it is not a cable for every rectangular dish.
- Disconnect equipment power before changing the cable. Keep plugs clean and dry, avoid strain and tight bends, and fully seat each connector without forcing it.
- Use the supplied cable and equipment instructions for outdoor routing, connector sealing and permitted installation; protective storage caps do not establish an installed waterproof rating.
FAQ
Can it join onto the end of my original cable?
The product is a complete cable with dedicated Gen 2 ends. Choose a longer cable for the whole route; no inline joining adapter is supplied.
Which Starlink hardware does it match?
The listed connection is for the Standard Actuated Gen 2 rectangular dish.
Do the end caps make the connected cable waterproof?
The caps protect unplugged ends. Follow the actual cable and equipment sealing instructions for installed connections.
English 
German 
Spanish 