A Fine Mesh for the Lower Grille
Add a fine stainless steel mesh layer at the lower front grille of Model Y Juniper (2025+) or Model YL (2026+) with the matching bumper configuration. The black ABS frames form a split left and right set, and the two mesh inserts detach for cleaning. It is an added debris screen at the original grille opening.
- Stainless Steel Mesh
- Removable Panels
- Black ABS Frame
- Split Left / Right
Hauptmerkmale
-
Fine Stainless Steel Mesh
A fine stainless steel screen sits behind a honeycomb support in the lower grille opening
-
Split Left And Right Design
The two sides are separate pieces and each mesh insert matches its outer frame
-
Removable Mesh Panels
The inserts detach from their frames so you can clear debris and clean them
-
Black ABS Frame
A molded black ABS frame follows the lower grille shape
-
Camera Area
The center contour is shaped around the pictured front camera area.
-
Clip And Adhesive Fit
Rear locating clips and adhesive at the outer sections hold the set in place
Highlights
Fine Mesh behind the Honeycomb Support
A fine stainless steel screen behind the honeycomb support helps intercept insects and leaves. It is an everyday debris screen, rather than a rated stone-impact shield.
Two Sides with Matching Inserts
The set includes two outer grille frames and two removable mesh inserts. The product view shows the inserts fitted into their corresponding left and right frames.
The Front End
The installed view shows Juniper. Does not fit Performance.
Remove Panels for Cleaning
Release each mesh insert carefully from its matching frame. Clear debris, clean the detached insert and refit it securely once dry; a blocked screen can restrict the intake.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | 2025+ | Matching lower grille and camera layout |
| Model YL | 2026+ | Matching lower grille and camera layout |
Not compatible with Model Y Performance. Shaped to the lower grille and front camera layout shown in the product photos.
Technische Daten
| Produkttyp | Split insect net front bumper grille set with removable mesh panels |
|---|---|
| Compatible Models | Model Y Juniper 2025+, Model YL 2026+; not Model Y Performance |
| Position / Location | Front bumper lower grille |
| Material | Black ABS frame with stainless steel mesh |
| Farbe | Schwarz |
| Menge | 1 left and right set: 2 outer frames and 2 removable mesh inserts |
| Installation Type | Rear locating clips and adhesive at the outer sections |
| Lieferumfang | 2 outer grille frames and 2 matching removable mesh inserts |
What's in the Box
- 2×Outer grille frames (left and right)
- 2×Matching removable mesh inserts
Installation
- Test-fit both halves on the lower grille.
- Clean and dry the contact areas, then attach with the supplied clips and adhesive.
- Remove the adhesive release liners and secure both halves.
Gut zu wissen
Achtung
- Does not fit Model Y Performance.
- Remove buildup from the mesh, especially after trips through insect-heavy or leafy areas.
- An added screen can introduce intake resistance, especially when dirty.
Pflege
- Remove accumulated debris from the mesh gently after trips.
- Clean the detached panels as needed and refit them securely once dry.
FAQ
Does it replace the original grille?
No. It is an accessory fitted at the existing lower grille opening.
Will it affect airflow?
The mesh has open passages for air, but an added screen can add resistance, especially when dirty. No airflow or thermal test results are published.
Can I take the mesh out for cleaning?
Yes. The left and right mesh inserts are removable from their matching outer frames. Release them carefully, remove debris and reinstall securely after cleaning and drying.
Is it a stone-impact shield?
No. It is intended to help intercept everyday insects, leaves and loose debris and has no published stone-impact rating.
English 
German 
Spanish 