TESVXtesvx.com
Quelle: https://tesvx.com/de/product/model-y-juniper-real-carbon-fiber-rear-diffuser/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypCarbon Fiber Rear Bumper Diffuser Overlay
Vehicle CompatibilityModel Y Juniper 2025+
MaterialMolded carbon fiber with automotive UV clear coat
Surface FinishGlossy Carbon Fiber / Matte Carbon Fiber / Glossy Forged Carbon Fiber
Finish OptionsGlossy Carbon Fiber / Matte Carbon Fiber / Glossy Forged Carbon Fiber
Installationsmethode15-minute peel and stick; clean, promoter, align, press 60 s; cure 48 h; install above 60 °F (15 °C)
Lieferumfang2x carbon fiber overlay pieces (L&R), pre-installed 3M VHB tape, 1x adhesion promoter
Versandgewicht1.4 kg (3.09 lb)

Details

Carbon Fiber for Your Rear Diffuser

Add carbon fiber trim to the original rear diffuser of Model Y Juniper Premium with this left-and-right overlay set. Choose glossy carbon fiber, matte carbon fiber or glossy forged carbon fiber. The pieces attach with pre-applied adhesive tape and a supplied adhesion promoter. Does not fit Performance or Standard Range diffusers.

  • Carbon Fiber Overlay
  • Left + Right Set
  • Three Finishes
  • Adhesive Mount

Hauptmerkmale

  1. Molded carbon overlay

    Decorative left and right pieces fit over the original lower rear-diffuser trim.

  2. Three finishes

    Choose glossy woven carbon, matte woven carbon or glossy forged carbon.

  3. Adhesive mounting

    Pre-applied double-sided tape secures the overlays without drilling.

  4. Two-piece set

    One vehicle-left and one vehicle-right trim overlay are supplied.

  5. Adhesion promoter supplied

    Prepares the contact surface for the adhesive.

  6. Premium contour application

    Shaped to the original Juniper Premium diffuser profile.

Highlights

Rear-Diffuser Appearance - TESVX Rear Diffuser Overlay
Rear-Diffuser Appearance

The overlays trace the matching lower rear-diffuser contour. They add decorative outer trim rather than replacing the whole diffuser assembly.

Two Shaped Pieces - TESVX Rear Diffuser Overlay
Two Shaped Pieces

The set contains separate left and right overlays. Select glossy weave, matte weave or glossy forged carbon finish and dry-fit both pieces to the original profile.

Adhesive Contact Surface - TESVX Rear Diffuser Overlay
Adhesive Contact Surface

Pre-applied tape is shown on the back of the overlay. An adhesion promoter is supplied; residue-free removal is not claimed.

Kompatibilität

Modell Years / Version Hinweise
Model Y Juniper Premium Exact original diffuser contour must match; excludes Performance and Standard Range

Fits Model Y Juniper Premium; the overlays follow the complete original diffuser outline.

Technische Daten

Produkttyp Real carbon fiber rear diffuser bumper trim overlay
Compatible Models Model Y Juniper Premium with the original rear-diffuser contour; not Performance or Standard Range
Position / Location Factory rear diffuser on the rear bumper
Material Molded carbon fiber
Surface Finish Glossy, matte or glossy forged carbon fiber
Menge 2 pieces (left and right)
Installation Type Pre-applied double-sided adhesive tape; no drilling
Lieferumfang 2 carbon overlay pieces (left and right), pre-applied tape and 1 adhesion promoter
Versandgewicht 1.4 kg (3.09 lb)

What's in the Box

  • 2×Molded carbon fiber overlay pieces (left and right)
  • Pre-applied double-sided adhesive tape
  • 1×Adhesion promoter

Installation

Difficulty
Moderate
  1. Hold both overlays at the original diffuser with the liner intact.
  2. Clean and dry the compatible contact surfaces using a material-safe product. Apply the supplied promoter.
  3. Align the correct left and right pieces before exposing the adhesive. Press evenly at the contact areas and allow the specified adhesive curing interval before washing or driving.
  4. Recheck retention after initial use and periodically thereafter.

Gut zu wissen

Achtung
  • Fits only the original Juniper Premium diffuser contour. Does not fit Performance or Standard Range.
  • Dry-fit before bonding, then press the overlays in place and allow the adhesive to cure.
  • Stop use if either piece lifts, cracks or loosens.
  • Adhesion, finish wear and removal effects vary with preparation and use. No mark-free removal, high-speed retention or automatic-car-wash guarantee is established.
Pflege
  • Use mild vehicle-safe wash soap and a soft cloth. Avoid abrasive tools, aggressive solvents and direct high-pressure jets at the bonded edges; inspect finish and mounting regularly.

FAQ

Is this a complete replacement diffuser?

No. The set contains two carbon fiber overlays for the original lower rear-diffuser trim.

Which Juniper trim does it fit?

The listing names Premium and excludes Performance and Standard Range.

What finishes are available?

Glossy woven carbon fiber, matte woven carbon fiber and glossy forged carbon fiber.

When can I wash or drive after bonding?

Follow the curing and temperature instructions for the adhesive actually supplied.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Carbon Fiber Rear Bumper Diffuser Overlay
Vehicle Compatibility
Model Y Juniper 2025+
Material
Molded carbon fiber with automotive UV clear coat
Surface Finish
Glossy Carbon Fiber / Matte Carbon Fiber / Glossy Forged Carbon Fiber
Finish Options
Glossy Carbon Fiber / Matte Carbon Fiber / Glossy Forged Carbon Fiber
Installationsmethode
15-minute peel and stick; clean, promoter, align, press 60 s; cure 48 h; install above 60 °F (15 °C)
Lieferumfang
2x carbon fiber overlay pieces (L&R), pre-installed 3M VHB tape, 1x adhesion promoter
Versandgewicht
1.4 kg (3.09 lb)

Bewertung schreiben

Carbon Fiber Rear Diffuser Bumper Trim with Glossy, Matte & Forged Finishes for Tesla Model Y Juniper
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
Carbon Fiber Rear Diffuser Bumper Trim with Glossy, Matte & Forged Finishes for Tesla Model Y Juniper

Preisspanne: US$179.00 bis US$199.00

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden