Carbon-Fiber Trim for Highland Rear Lamps
Add a carbon finish around the refreshed Model 3 Highland rear lamps with this two-piece left-and-right trim set. Available in Glossy, Matte or Forged. The covers mount with adhesive tape; the factory light assemblies stay in place.
- Highland Lamp Shape
- Left + Right Set
- 3 Finish Options
- Adhesive Mounting
Hauptmerkmale
-
Left and right set
Two trim pieces outline the matching rear lamps on the refreshed Model 3 Highland.
-
Carbon-fiber trim
The decorative covers add a carbon finish around the lamp housing without replacing the light assembly.
-
Three options
Available in Glossy, Matte or Forged.
-
Adhesive mounting
Tape attaches the trim to the prepared surface; test the alignment before removing the backing.
-
Highland lamp shape
Shaped to the refreshed Highland rear-light outline.
Highlights
Left and Right Trim
The set contains two trim pieces for the matching Highland rear lamps. The pictured woven finish is an example; choose the finish option required for your order.
Adhesive Tape Backing
The rear face uses adhesive tape.
Choose the Finish
Glossy, Matte and Forged are separate options. This cosmetic trim does not provide a lamp or aerodynamic upgrade.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | Refreshed rear-lamp shape; left and right set |
Fits the refreshed Model 3 Highland rear lights. Does not fit the pre-refresh Model 3.
Technische Daten
| Produkttyp | Dry carbon fiber tail light cover / bezel, 2-piece set |
|---|---|
| Compatible Models | Model 3 Highland, refreshed rear-light shape |
| Position / Location | Rear tail lights, left and right |
| Material | Carbon fiber |
| Surface Finish | Glossy, matte or forged carbon fiber |
| Menge | 2 pieces (left and right) |
| Installation Type | Adhesive tape; dry-fit before application |
| Versandgewicht | 660 g (1.46 lb), all listed finish options |
What's in the Box
- 2×Dry carbon fiber tail light covers (left and right)
Installation
- Clean the mounting surface with a cleaner suitable for the lamp material; leave it dry and free of wax.
- Place both trim pieces against their lamps and align them.
- Remove the tape backing, align carefully and press firmly for 1–2 minutes.
- Avoid washing for 24 hours.
Gut zu wissen
Achtung
- Does not fit the pre-refresh Model 3.
- Do not cover illuminated lens areas, interfere with the trunk or use the trim to conceal lamp damage.
- Apply only to clean, dry surfaces and avoid washing for 24 hours after fitting.
- Choose any removal method suitable for the factory lamp surface; do not force the trim or assume damage-free removal.
Pflege
- Use a soft cloth and gentle cleaning products suitable for the finish.
- For removal, use a method suitable for the lamp surface and adhesive; do not force the trim.
FAQ
Will this fit the pre-refresh Model 3?
No. It fits the refreshed Highland rear-lamp outline only.
How many pieces are included?
Two tail-light trim pieces are listed: one for the left and one for the right.
Are the tail lights replaced?
No. These are adhesive trim covers for the existing lamp assemblies.
Which finishes can I choose?
Select Glossy, Matte or Forged. Images may show one finish rather than every option.
Can I wash the car immediately?
Avoid washing for 24 hours after application and follow the adhesive instructions supplied with your set.
English 
German 
Spanish 