A Carbon-Look Finish for Your Steering Stalks
These ABS covers add a carbon-look finish to the original left turn-signal stalk and right gear-selection stalk. Choose black or red for the listed earlier Model 3 or pre-Juniper Model Y with matching stalk contours. Adhesive tape holds the trim covers over the original controls.
- ABS Plastic
- Carbon-Look Pattern
- Left and Right
- Black or Red
Hauptmerkmale
-
ABS Carbon Look
Molded ABS covers have a carbon-pattern finish, rather than structural carbon fiber.
-
Left and Right Coverage
The kit covers the turn-signal stalk and the gear-selection stalk.
-
Two Color Options
Black and red finishes are separate purchase choices.
-
Original Controls Retained
These are trim covers; they do not replace the stalk mechanism or add electronic functions.
-
Adhesive Backing
Double-sided tape attaches the covers to correctly prepared, matching stalk surfaces.
Highlights
Black Carbon-Look Trim
The installed black example shows both stalk covers beside the original steering wheel. The wheel and controls remain the vehicle’s existing equipment.
Separate Left and Right Shapes
Each cover follows its corresponding stalk contour. Openings at the stalk ends leave the original buttons accessible.
Red Finish Option
The red example shows the alternative finish on the same left-and-right coverage. Choose one color for the kit rather than expecting both colors in the package.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Earlier version with matching left and right stalks; not stalkless Highland. |
| Model Y | 2020–March 2025 | Pre-Juniper version with original stalks. |
This kit does not supply replacement stalk mechanisms.
Technische Daten
| Produkttyp | Turn-signal and gear-selection stalk trim covers |
|---|---|
| Compatible Models | Model 3 2017–2023; pre-Juniper Model Y 2020–March 2025 with original stalks |
| Position / Location | Left and right steering-column stalks |
| Material | ABS plastic |
| Surface Finish | Carbon-look pattern |
| Farbe | Black or red |
| Menge | Coverage for one left and one right stalk |
| Installation Type | Double-sided adhesive tape over the original stalks |
| Lieferumfang | Left and right stalk cover kit with adhesive tape |
| Versandgewicht | 327 g (0.72 lb); not net product weight |
What's in the Box
- 1×Left-stalk cover kit
- 1×Right-stalk cover kit
- Double-sided adhesive tape for attachment
Installation
- Dry-fit the left and right covers over their original stalks with the adhesive liner intact.
- Clean and dry the bonding surfaces using a finish-compatible method.
- Apply the included adhesive tape and press each aligned cover evenly onto its stalk.
- Bond the covers following the tape instructions.
Gut zu wissen
Achtung
- For vehicles with original left and right steering-column stalks. It does not add stalks to a stalkless steering column.
- Use cleaners or adhesion products only when specified as compatible with the cover, tape and original stalk finish. Do not let liquids or adhesive enter switches or joints.
Pflege
- Use a soft lightly dampened cloth and dry the trim; keep liquid out of switches.
FAQ
Is the carbon finish real carbon fiber?
These are ABS plastic trim covers with a carbon-look pattern.
Which controls are covered?
The kit covers the original left turn-signal stalk and right gear-selection stalk. It does not replace their mechanisms.
Are tools or extra colors included?
The covers use included adhesive tape and require no fitting tools. Choose black or red; both colors are not supplied together.
English 
German 
Spanish 