A Matching Carbon Finish for Both Front Seat Backs
This two-panel set replaces the rear-facing outer panels of the driver and front passenger seats. Choose matte or glossy carbon fiber and the vehicle-version group for your seat design. The closed panels give a continuous finish in place of the original seat-back storage pockets; they do not replace the full seats.
- 2-Piece Pair
- Panel Replacement
- Matte or Glossy
- Closed Back Design
Hauptmerkmale
-
Matching Pair
Two panels for the driver and front passenger seat backs
-
Replacement Design
These outer panels take the place of the original back panels
-
Two Finishes
Choose matte or glossy carbon fiber
-
Closed Surface
A continuous rear-facing panel replaces the original storage pocket
-
Model Groups
Separate selections for legacy Model 3/Y and Highland/Juniper seats
-
Gentle Care
Wipe with a soft microfiber cloth and avoid harsh solvents
Highlights
A Pair of Closed Seat-Back Panels
The product pair shows two rear-facing panels with a closed center in place of the original storage pocket. The set is for the driver and front passenger seat backs; the photograph illustrates the panel design, not seat-system approval.
Weave Across the Curved Surface
The close-up shows the woven finish following the curved shoulder and center of a panel. Matte and glossy finishes are available; appearance changes with lighting, and the image does not establish compatibility with a specific seat version.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023.08 | Shared version with Model Y (2020–2025.03) |
| Model Y | 2020–2025.03 | Shared version with Model 3 (2017–2023.08) |
| Model 3 Highland | Highland/Juniper seat version | |
| Model Y Juniper | Highland/Juniper seat version |
Not compatible with Performance editions, Model YL or seats with integrated headrests.
Technische Daten
| Produkttyp | Replacement outer back panels for the two front seats |
|---|---|
| Compatible Models | Model 3 (2017–2023.08), Model Y (2020–2025.03), Model 3 Highland and Model Y Juniper; not Performance, Model YL or integrated-headrest seats |
| Position / Location | Rear-facing outer panels of the driver and front passenger seat backs |
| Material | Carbon fiber |
| Surface Finish | Matte carbon fiber or glossy carbon fiber |
| Menge | 2 panels (driver and front passenger) |
| Installation Type | Replaces the original outer panels using the seat mounting points |
| Lieferumfang | 2 carbon fiber replacement back panels in the selected finish and vehicle version |
| Care Instructions | Wipe gently with a soft microfiber cloth, lightly dampened if needed; avoid abrasive pads and harsh solvents |
| Versandgewicht | 950 g (2.1 lb) |
What’s in the Box
- 2×Carbon fiber replacement seat back panels (driver and front passenger)
Gut zu wissen
Achtung
- Does not fit Performance editions, Model YL or seats with integrated headrests.
- Front seats contain side airbags. Tesla guidance instructs against modifying the front passenger seat to preserve occupant detection. The replacement design does not establish an exception to that requirement.
- The factory seat-back storage pocket is not retained.
Pflege
- Wipe gently with a clean, soft microfiber cloth, lightly dampened if needed.
- Avoid abrasive pads and harsh solvents; carbon fiber finishes can still scratch.
FAQ
Does this cover the rear bench seat?
No. It replaces the exterior back panels of the two front seats, facing the rear passengers, and does not cover the rear bench or replace the full seat assembly.
Does the carbon panel keep the original storage pocket?
No. The replacement has a closed carbon fiber center, so the factory storage pocket is not retained.
Is it a stick-on carbon fiber surround?
No. It is a full seat-back panel replacement installed at the seat mounting points after the original outer panel is removed.
What comes with my order?
Two carbon fiber replacement back panels, for the driver and front passenger seats, in your selected finish and vehicle version.
English 
German 
Spanish 