A Finish Upgrade for the Rear Cup-Holder Surround
This ABS trim covers the existing figure-eight cup-holder surround in the rear folding armrest of Model 3 (2017–2023) and Model Y (2020–2023). Choose Carbon Fiber Texture or Black and attach the single connected piece with the supplied double-sided tape.
- Rear Armrest Trim
- ABS
- Carbon Texture or Black
- One Piece
- Adhesive Mounting
Hauptmerkmale
-
Rear Armrest Accent
Fits over the existing rear cup-holder surround to change its visible finish.
-
ABS Construction
A molded ABS trim piece follows the figure-eight shape around the two cup openings.
-
Carbon Fiber Texture
The patterned option gives a carbon-look finish; it is ABS rather than structural carbon fiber.
-
Black Option
A plain Black finish is also available in the color selector.
-
Adhesive Mounting
Supplied double-sided tape attaches the trim to the existing surround without drilling.
-
Single-Piece Surround
One connected trim piece surrounds both cup openings; this is a decorative cover, not a replacement cup holder.
Highlights
Rear Armrest Placement
The trim sits around the two cup openings in the rear armrest, adding a visible accent while retaining the existing cup holder.
Carbon-Look Pattern
The Carbon Fiber Texture option has a patterned ABS finish. It is decorative carbon-look trim rather than a carbon-fiber component.
Plain Black Finish
Choose Black for a plain finish. Each order includes the selected finish, rather than both color options.
Tape-On Fitting
Double-sided tape attaches the trim to the existing surround.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Original rear folding-armrest twin cup-holder surround. |
| Model Y | 2020–2023 | Original rear folding-armrest twin cup-holder surround. |
Does not fit later redesigned interiors, including Highland, Juniper and Model Y L.
Technische Daten
| Produkttyp | Rear cup-holder surround trim |
|---|---|
| Compatible Models | Model 3 (2017–2023); Model Y (2020–2023) |
| Position / Location | Rear folding armrest cup-holder surround |
| Material | ABS |
| Farbe | Carbon Fiber Texture / Black |
| Menge | 1 trim piece |
| Installation Type | Doppelseitiges Klebeband |
What's in the Box
- 1×rear cup-holder surround trim (selected finish)
Installation
- Park the vehicle, lower the rear armrest and dry-fit the trim.
- Clean the bonding area with a cleaner suitable for the existing interior finish and let it dry. Follow the tape instructions for surface preparation.
- Remove the tape backing, align the trim without blocking the cup openings and press evenly. The fitting instruction calls for 10 seconds of pressing.
- Allow the adhesive to bond and cure.
Gut zu wissen
Achtung
- Fits Model 3 2017–2023 and Model Y 2020–2023. Does not fit Highland, Juniper, Model Y L or other redesigned cup-holder layouts.
- Test the armrest folding movement and cup-holder access before removing the adhesive backing.
- Pressing for 10 seconds is the fitting instruction, not proof that adhesive has fully cured.
- Choose Carbon Fiber Texture or Black. This accessory does not change cup capacity, provide a dust seal or guarantee scratch, corrosion or UV protection.
Pflege
- Wipe gently with a soft cloth and a cleaner compatible with the trim finish. Remove spills without soaking the adhesive edges.
FAQ
Is the carbon-look option made from real carbon fiber?
It is ABS with a Carbon Fiber Texture finish; it is not a carbon-fiber part.
Is this a cup-holder replacement?
No. It is a single connected decorative surround that attaches over the existing rear cup-holder trim.
Are both finishes included?
No. Choose Carbon Fiber Texture or Black; the package contains one trim piece in that finish.
Does it fit Highland or Juniper?
No. It fits Model 3 2017–2023 and Model Y 2020–2023 only; the redesigned Highland and Juniper interiors are not compatible.
Is the adhesive ready to use after 10 seconds?
The 10-second instruction describes pressing the trim into place. Follow the tape’s curing instructions before normal use.
English 
German 
Spanish 