Carbon Fiber Rear Cup-Holder Surround
One molded carbon fiber trim piece for the rim around the existing rear armrest cup openings on the listed pre-refresh Model 3 and Model Y vehicles. Choose Matte, Glossy or Forged Carbon Fiber. The stated package includes a separate double-sided adhesive tape piece; the original cup-holder mechanism remains in place.
- One Trim Piece
- Three Finishes
- Rear Armrest Rim
- Tape Piece Included
Hauptmerkmale
-
Rear Cup-Holder Trim
A single surround piece covers the rim of the existing rear armrest cup-holder area.
-
Molded Carbon Fiber
The listed material is molded carbon fiber; the trim adds a visible finish around the two cup openings.
-
Three Finish Selections
Matte, Glossy and Forged Carbon Fiber are separate choices under the shared vehicle option.
-
Tape Included
The stated package contains one trim piece and one piece of double-sided adhesive tape.
-
The Armrest Profile
Shaped to the existing rear cup-holder rim and openings of the listed pre-refresh versions.
-
Preserve Cup and Armrest Use
Trial-fit without reducing cup fit or preventing normal rear armrest movement and stowage.
Highlights
Finish Around the Existing Openings
The installed example shows a woven-finish surround around two existing cup wells. This is decorative rim trim, not a new cup-holder or armrest mechanism.
Three Finish Choices
Matte, Glossy and Forged Carbon Fiber are separate selections. One trim piece in the selected finish is stated in the package.
Tape Attachment
One piece of double-sided tape is included. Trial-fit and follow the instructions for the actual tape before exposing the adhesive.
Keep the Armrest Usable
Do not cover adjacent seat belt access or use an interfering trim piece.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023.08 | Pre-Highland rear armrest profile. TSL3619 finishes. |
| Model Y | 2020–2025.03 | Pre-Juniper rear armrest profile. A 2025 production date alone does not identify the body revision. |
The shared option lists these ranges for the earlier cup-holder profile. Does not fit Highland, Juniper or Model YL.
Technische Daten
| Produkttyp | Rear armrest cup-holder surround trim |
|---|---|
| Compatible Models | Model 3 2017–2023.08; pre-Juniper Model Y 2020–2025.03 |
| Position / Location | Rim around existing rear armrest cup openings |
| Material | Molded carbon fiber |
| Surface Finish | Matte / Glossy / Forged Carbon Fiber |
| Menge | 1 trim piece |
| Gewicht | 100 g shipping weight; not a measured trim-only weight |
| Installation Type | Double-sided adhesive tape attachment |
| Lieferumfang | 1 trim piece and 1 piece of double-sided adhesive tape |
| SKU | Matte TSL3619-B; Glossy TSL3619-A; Forged TSL3619-C |
What's in the Box
- 1×Carbon fiber rear cup-holder surround trim
- 1×Double-sided adhesive tape piece
- The original armrest, cup-holder mechanism and cups are not included.
Installation
- Trial-fit the trim with the adhesive backing intact, aligning both cup openings and the complete rim.
- Prepare and dry the contact surface using supplies compatible with the original surface and the actual tape instructions.
- Align the trim, then apply pressure and allow the curing period.
Gut zu wissen
Achtung
- Trial-fit the rim and both cup openings with the tape backing intact; do not attach a mismatched piece.
- The trim leaves cup fit, rear armrest movement/stowage and adjacent seat belt access clear, and does not change the cup-holder mechanism.
Pflege
- Use gentle surface-compatible cleaning; avoid saturating or loading the bonded edge.
- Adhesive removal can leave residue or surface marks.
FAQ
Does this replace the rear cup-holder mechanism?
No. The photos and adhesive mounting show a surround trim over the existing cup-holder rim. The armrest and cup wells remain in place.
What is in the stated package?
One carbon fiber trim piece and one piece of double-sided adhesive tape. The original armrest and cups are not included.
Which finishes are offered?
Matte TSL3619-B, Glossy TSL3619-A and Forged TSL3619-C are separate choices.
Can I fit it to Highland or Juniper?
No. It does not fit Highland or Juniper; it fits the earlier-profile armrest only, and a 2025 date alone does not identify the body revision.
English 
German 
Spanish 