Carbon Fiber Caps for Your Side Mirrors
This left-and-right pair of dry carbon fiber caps fits over the original side mirror caps of Tesla Model 3 and Model Y and changes the entire visible upper surface in a matte or glossy finish. They are self-adhesive overlay caps, not replacement mirror assemblies, so the mirror glass stays in place and the factory cap remains underneath. Choose Model 3 Highland 2024+, Model Y 2020–2025.03 or Model 3 2017–2023.10.
- Dry Carbon Fiber
- Left & Right Pair
- Glossy or Matte
- Adhesive Overlay
Hauptmerkmale
-
Full Cap Coverage
The pair fits over the original mirror caps and changes the entire visible upper surface
-
Glossy or matte
Choose a reflective gloss finish or a lower-reflection matte finish over the visible carbon weave.
-
Adhesive Overlay Fit
The caps bond over the factory shells without removing the mirror glass or replacing the housing
-
Original Silhouette
The cap follows the factory mirror shape for an OEM-style appearance
-
Three Vehicle Groups
Options cover Model 3 Highland 2024+, Model Y 2020–2025.03 and Model 3 2017–2023.10
-
Easy Care
Clean with a soft microfiber cloth and mild vehicle-safe cleaner
Highlights
Left and Right Overlay Pair
Two dry carbon fiber caps fit over the original painted mirror shells. They add an outer layer rather than replacing the mirrors or factory caps.
Matte Carbon Finish
The matte option gives the carbon weave a subdued surface appearance. Choose the exact vehicle group before selecting the finish.
Glossy Carbon Finish
The glossy option creates stronger reflections and contrast over the weave. Finish and weave can differ from other carbon trim or production batches.
Dry-Fit Before Bonding
Each cap sits over the original shell without interfering with mirror folding.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | Glossy or matte carbon fiber |
| Model Y | 2020–2025.03 | Glossy or matte carbon fiber |
| Model 3 | 2017–2023.10 | Glossy or matte carbon fiber |
Fits Model 3 2017–2023.10, Model 3 Highland 2024+ and Model Y 2020–2025.03. Does not fit Model Y Juniper.
Technische Daten
| Produkttyp | Dry carbon fiber side mirror cap overlay, OEM style, left and right pair |
|---|---|
| Compatible Models | Model 3 Highland (2024+), Model Y (2020–2025.03), Model 3 (2017–2023.10) |
| Position / Location | Side mirror caps, left and right |
| Material | Dry carbon fiber |
| Surface Finish | Glossy or matte carbon fiber |
| Menge | 1 pair (left and right) |
| Installation Type | Self-adhesive overlay fitted over the original mirror caps; no mirror removal |
| Lieferumfang | 1 left and right pair of carbon fiber mirror caps |
| Care Instructions | Soft microfiber cloth and mild vehicle-safe cleaner; avoid abrasives and solvents |
What's in the Box
- 1×Left carbon fiber mirror cap
- 1×Right carbon fiber mirror cap
Installation
- Identify the exact vehicle group and left and right caps. Clean the compatible painted cap surfaces with a vehicle-safe product and allow them to dry.
- Test-fit with adhesive liners intact.
- Remove the liners and bond the caps with even pressure along the perimeter.
- Allow the adhesive to set before washing.
Gut zu wissen
Achtung
- Choose the correct vehicle group; mirror-shell shape differs by model and generation.
- Dry-fit each cap with the liner intact; stop if a cap rocks, requires force, leaves an uneven gap or interferes with mirror folding.
- Clean the surface and work on a dry surface at a suitable temperature; press evenly along the full perimeter and let the adhesive set before washing.
- Do not direct close high-pressure water at the cap edges.
- An overlay adds an outer layer. Removal effort and residue vary with surface condition and bond time.
Pflege
- Use a soft microfiber cloth and a mild vehicle-safe cleaner.
- Avoid abrasive pads, aggressive solvents and picking at the perimeter.
FAQ
Is this a replacement factory mirror shell?
No. It is a dry carbon fiber overlay cap with self-adhesive backing, fitted over the compatible original mirror cap.
Does the package cover both sides?
Yes. It is a matched left-and-right pair.
Does the Model Y option fit Juniper?
No. The Model Y option fits 2020–2025.03 and does not fit Model Y Juniper.
Can these overlays be removed later?
Yes. The original cap remains underneath. Removal effort and adhesive residue depend on bond time, temperature and surface condition.
English 
German 
Spanish 