Carbon Fiber Around the Rear Screen Air Outlet
Add dry molded carbon fiber trim around the rear screen and air outlet housing of your Model S or Model X. The open overlay is available in Glossy or Matte and attaches with peel-and-stick adhesive backing.
- Dry Molded Carbon Fiber
- Glossy or Matte
- Open Frame
- Adhesive Mounting
Hauptmerkmale
-
Dry Molded Carbon Fiber
The overlay adds a woven carbon fiber surface around the rear screen and air outlet housing.
-
Open Center
The frame leaves the rear screen glass exposed rather than applying a film over the display.
-
Glossy or Matte
Two finish selections let you choose the surface appearance of the trim.
-
Adhesive Fitting
Peel-and-stick backing bonds the overlay to the surrounding housing after alignment.
-
Modellspezifische Auswahl
Available for Model S 2021+ or Model X 2023+.
-
Function Clearance
The frame leaves rear airflow, touchscreen edges and nearby ports accessible.
Highlights
Carbon Fiber Surround
The shaped frame adds woven trim around the rear display and air outlet housing while leaving the center open.
Open Frame Profile
The center opening leaves the display glass exposed. Shaped to the air outlet surround of the rear console.
Select Your Model and Finish
Choose Model S 2021+ or Model X 2023+, then Glossy or Matte. Each model has its own housing outline.
Align Before Bonding
Trial-fit with the adhesive liner intact. Align the overlay around the screen, vent and ports before pressing it into place.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model S | 2021+ | Rear screen and air outlet housing. |
| Model X | 2023+ | Rear screen and air outlet housing. |
The Model X selection starts at 2023; it does not fit earlier Model X housings.
Technische Daten
| Produkttyp | Rear screen and air outlet housing frame overlay |
|---|---|
| Compatible Models | Model S 2021+; Model X 2023+ |
| Position / Location | Rear center-console screen and air outlet surround |
| Material | Dry molded carbon fiber |
| Surface Finish | Glossy or Matte |
| Installation Type | Peel-and-stick adhesive backing |
| Versandgewicht | 1.2 kg; not the net frame weight |
| SKU | TSL2892-glossy / TSL2892-matte |
What's in the Box
- Rear screen and air outlet trim overlay in the selected finish.
Installation
- Trial-fit with the liner intact.
- Clean and dry the bonding surface using a method suitable for its finish and the actual adhesive.
- Remove the liner, align the frame and press the bonding surfaces.
- Allow the specified bonding time.
Gut zu wissen
Achtung
- Select Model S 2021+ or Model X 2023+ and trial-fit against the actual rear housing profile before bonding.
- Keep the overlay and adhesive off the rear touchscreen glass and leave vents and nearby ports clear.
- Use surface cleaning and bonding methods suitable for the housing finish and the actual adhesive. Removal results depend on the adhesive and underlying finish.
Pflege
- Clean the frame gently with a soft cloth and a finish-compatible cleaner.
- Avoid abrasive cleaning and pulling on the edges. Follow the adhesive instructions for removal.
FAQ
Does this cover the rear touchscreen glass?
No. This is an open trim overlay for the surrounding screen and air outlet housing, rather than a film over the glass.
Which Model X years can I select?
The Model X option starts at 2023. Model X 2023+; earlier Model X housings are excluded.
Which finishes are available?
Glossy and Matte are the selectable finishes.
Is removal guaranteed to leave no marks?
No. Removal depends on the adhesive, underlying housing finish and method.
English 
German 
Spanish 