TESVXtesvx.com
Quelle: https://tesvx.com/de/product/tesla-led-headlight-assembly-for-model-s/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypLED headlight assembly
Compatible ModelsModel S 2016-2022 Premium【With Cornering Lights】 / Model S 2016-2017 Standard 【Without Cornering Lights】
Side OptionsLeft / Right / Pair
MaterialPolycarbonate lens
MengeLeft, right or a pair
Connector TypeFactory 14-pin connector
Light SourceLED
Version OptionsPremium with cornering lights (2016-2022) or Standard without cornering lights (2016-2017)

Details

LED Headlight Assembly for Tesla Model S

Replace a matching Model S front LED headlight with the selected left, right or pair of assemblies. Choose Premium for a vehicle with the corresponding cornering-light equipment, or Standard for the matching non-cornering configuration. Beam adjustment is required after installation.

  • Front LED Headlight
  • Left / Right / Pair
  • Premium or Standard

Hauptmerkmale

  1. Front LED Assembly

    A complete front headlight assembly for matching LED-equipped Model S vehicles; it is not a rear lamp or a loose bulb.

  2. Premium and Standard Choices

    Premium is the cornering-light choice, while Standard is the non-cornering choice.

  3. Left, Right or Pair

    Select the vehicle left side, right side or both; a single-side selection supplies one headlight.

  4. Polycarbonate Lens

    The lens covers the lamp assembly.

  5. Original Part Match

    The housing mounts, connector pinout and lighting functions follow the original Model S LED headlight assembly.

  6. Installation

    Front fascia access and careful handling of wiring, mounts and seals are required.

  7. Beam Alignment

    Beam aim is set after installation; a software reinstall alone does not set the physical beam alignment.

Highlights

A Complete Front Lamp - TESVX LED Headlight Assembly
A Complete Front Lamp

The assembly combines the front lamp housing and polycarbonate lens. Left and right assemblies are vehicle-side specific.

Rear Interfaces - TESVX LED Headlight Assembly
Rear Interfaces

The rear of the housing carries the mounts, seals and connector for the original LED headlight interface.

Choose the Lighting Version

Premium is the cornering-light choice and Standard is the non-cornering choice. Order Left, Right or Pair to suit the vehicle side and replacement scope; do not treat the versions as an automatic lighting upgrade.

Kompatibilität

Modell Years / Version Hinweise
Model S 2016–2022 Premium choice with cornering lights.
Model S 2016–2017 Standard choice without cornering lights.

Fits Model S 2016–2022 with LED headlights. Does not fit the nose-cone / Xenon configuration or Model S 2015 and earlier.

Technische Daten

Produkttyp LED front headlight assembly
Compatible Models Model S 2016–2022 LED-headlight configuration
Position / Location Front; vehicle left, right or both sides
Material Polycarbonate lens
Menge 1 assembly for Left or Right; 2 assemblies for Pair
Light Source LED
Installation Type Assembly replacement; front fascia access required
Lieferumfang Selected left, right or pair of headlight assemblies
Version Options Premium with cornering lights: 2016–2022 choice; Standard without cornering lights: 2016–2017 choice

What's in the Box

  • Headlight assembly: 1 selected left or right unit, or 2 units for the pair selection

Installation

Difficulty
Advanced
Werkzeuge
Vehicle-specific service tools, diagnostic equipment and beam-aim equipment
  1. Follow the applicable vehicle service procedure to secure the vehicle, obtain front fascia access and disconnect the headlight wiring safely.
  2. Install without forcing the harness or housing and refit all removed components using the applicable instructions.
  3. Perform any required diagnostic or configuration procedures, then adjust the beam aim.

Gut zu wissen

Achtung
  • Installation requires front fascia access. Vehicle configuration and beam aiming are separate steps.
  • Does not fit pre-facelift nose-cone / Xenon configurations or Model S 2015 and earlier.
Pflege
  • Clean the lens gently with a suitable soft cloth. Avoid abrasive polishing or chemicals that can damage the lens coating.
  • Have damaged mounts, persistent moisture, lighting faults or incorrect beam patterns inspected promptly. Do not continue road use with defective required lighting.

FAQ

Can I order only one headlight?

Yes. Left and Right each select one vehicle-side assembly; Pair selects both. Choose the matching Premium or Standard version as well.

Is Premium a cornering-light upgrade for every Model S?

No. Premium is the version for vehicles equipped with cornering lights; Standard is the version without cornering lights.

Does a software reinstall align the headlights?

No. Any required software or configuration procedure is separate from beam-aim measurement and adjustment.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
LED headlight assembly
Compatible Models
Model S 2016-2022 Premium【With Cornering Lights】 / Model S 2016-2017 Standard 【Without Cornering Lights】
Side Options
Left / Right / Pair
Material
Polycarbonate lens
Menge
Left, right or a pair
Connector Type
Factory 14-pin connector
Light Source
LED
Version Options
Premium with cornering lights (2016-2022) or Standard without cornering lights (2016-2017)

Bewertung schreiben

Polycarbonate LED Headlight Assembly with Plug-and-Play 14-Pin Connector for Tesla Model S
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
Polycarbonate LED Headlight Assembly with Plug-and-Play 14-Pin Connector for Tesla Model S

Preisspanne: US$539.00 bis US$1,258.00

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden