A Replacement Headlight for the Model Y Juniper
Replace the lower main lamp of the Model Y Juniper split front lighting system with a complete LED assembly and integrated driver. Available as a left lamp, a right lamp or a pair. The upper center light bar is a separate part; installation includes front fascia access, software service and beam aiming.
- LED Headlight
- PN 1918347 / 1918348
- Driver Module Included
- Left / Right / Pair
Hauptmerkmale
-
Lower Main Lamp
Replacement assembly for the lower part of the Juniper split front lighting system.
-
Left, Right or Pair
Select the physical side or both assemblies in the purchase options.
-
Included LED Driver
The listed assembly includes its driver module.
-
Separate Regional Choices
Fremont/Texas and Shanghai/Berlin options have separate part selections.
-
Part References
Listed left 1918347 and right 1918348 references help identify the intended lamp generation.
-
Service Installation
Front fascia access, electrical connection, software service and separate beam aiming are part of replacement work.
Highlights
Choose the Correct Lamp Side
Left and right are physical vehicle sides. Available as a single left or right assembly or as a pair.
Lower Main Lighting Assembly
The shaped housing belongs to the lower main lamp position of the split front lighting layout. It is separate from the upper front center light bar.
Rear Housing and Driver
The assembly includes an LED driver and rear electrical connection.
Regional and Beam Configuration
Fremont/Texas and Shanghai/Berlin are separate purchase choices. Market versions differ in side markers, beam pattern and traffic configuration; country or plant labels alone do not identify them.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | 2025.3+ | 2025–2026 refresh; lower main lighting unit |
Lamp references: 1918347 left and 1918348 right. The listing concerns Juniper lower main lamps, not the upper center light bar or every refreshed Model Y variant.
Technische Daten
| Produkttyp | LED headlight assembly (lower main lighting unit) replacement |
|---|---|
| Compatible Models | Model Y Juniper 2025.3+ (2025–2026 refresh) |
| Position / Location | Front, lower main lighting unit of the split headlight; left, right or pair |
| Material | Polycarbonate lens |
| Menge | 1 piece (Left or Right) or 1 pair (Left & Right) |
| Connector Type | Factory-style electrical connection |
| Light Source | LED assembly with integrated driver module |
| OEM Part Number | Listed matching references: LH 1918347-00-D / -00-E; RH 1918348-00-D / -00-E. Revisions differ by market. |
| Installation Type | Replaces the original assembly; front bumper removal required |
| Lieferumfang | Complete headlight assembly with integrated LED driver module |
What's in the Box
- Left option: 1 x left LED headlight assembly with integrated driver module
- Right option: 1 x right LED headlight assembly with integrated driver module
- Left & Right option: both assemblies
Installation
- Follow the corresponding vehicle electrical isolation procedure before handling the lamp connection.
- Professionally remove the front fascia as required to reach the lamp. Unlock the connector correctly and release the mounting fasteners, alignment stud and retaining clips without forcing the housing.
- Fit the matching replacement using the correct alignment and retaining points. Secure the connector and seals, then refit the fascia following the applicable vehicle procedure.
- Perform the required software service for replacement hardware. A software reinstall does not replace mechanical beam aiming.
- Aim the lamps with the appropriate market procedure and equipment.
Gut zu wissen
Achtung
- Plant labels alone do not establish market or beam compatibility, especially for imported vehicles.
- A regional label is not proof of approval or inspection eligibility.
- Software reinstall and mechanical beam aiming are separate operations.
- Test required low and high beams, configured adaptive functions, markers and all other original required front lighting functions after installation.
- Keep the lamp connectors, housing seals and mounting points correctly secured. Future software compatibility is not covered.
Pflege
- Keep the lens clean with a compatible non-abrasive method.
- Inspect housing seals, mounting and electrical connections if moisture, looseness or faults appear.
FAQ
Which front lighting part does this replace?
The lower main lamp of the Model Y Juniper split front lighting system. The upper center light bar is separate and is not included in this assembly.
How do I choose the regional version?
Use the original lamp reference, actual market and vehicle lighting configuration. The manufacturing plant label alone does not identify beam pattern, traffic-side configuration or marker functions.
Does the assembly include a driver?
Yes, the listed complete assembly includes its LED driver module.
Does a software reinstall aim the lamps?
No. Replacement software service and physical beam aiming are separate tasks. Installation includes the applicable service procedure and lamp aiming.
Will all adaptive functions and future updates work without faults?
That cannot be guaranteed.
English 
German 
Spanish 