TESVXtesvx.com
Quelle: https://tesvx.com/de/product/universal-trunk-umbrella-holder-for-all-models-waterproof/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypUmbrella holder
MaterialABS plastic
InstallationsmethodeHigh-strength adhesive backing, no screws
FunktionenHolds a wet umbrella and collects excess water

Details

Open-Top Umbrella Holder for the Trunk

An ABS holder for a folded umbrella, with an open top, side openings and rear hook-and-loop fastening. The illustrated body is approximately 19.5 × 6.6 × 6.1 cm overall. Empty any collected water outside the car.

  • ABS Body
  • Open-Top Storage
  • Hook-and-Loop Rear
  • Trunk Use

Hauptmerkmale

  1. Trunk umbrella storage

    The tall open-top holder supports a folded umbrella against a suitable trunk side surface, keeping it separate from loose cargo.

  2. Slotted ABS body

    The plastic holder has visible side openings and an open top; it is not a sealed container for transporting water or protecting luggage from every drip.

  3. Rear fastening strip

    The rear hook-and-loop surface connects the holder to its matching mounting strip; choose a surface and fixing method that suit the actual trunk trim.

  4. Compact outer profile

    The illustrated holder measures about 19.5 × 6.6 × 6.1 cm overall.

  5. Removable for emptying

    Take the holder out of its mounting position to empty any collected water outside the vehicle, then let the holder and umbrella dry.

  6. Mounting accessories

    The illustrated set includes one holder, one hook strip, one loop strip and two fixing screws.

Highlights

Folded Umbrella Storage - TESVX Umbrella Holder
Folded Umbrella Storage

The upright holder keeps a folded umbrella at the side of the trunk. The pictured cabin is a placement example.

Rear Hook-and-Loop Fastening - TESVX Umbrella Holder
Rear Hook-and-Loop Fastening

The rear strip connects to a matching mounting strip. Use the supplied guide for the intended surface and accessories, without assuming that every carpet or plastic panel holds the same load.

Empty Outside the Vehicle - TESVX Umbrella Holder
Empty Outside the Vehicle

Remove the holder to pour out any collected water outside the car. The open top and side slots do not make it a sealed container; allow the holder and umbrella to dry before storage.

Kompatibilität

Modell Years / Version Hinweise
Tesla trunks Mounts on a flat trunk wall or trim surface.

Mount it clear of moving seats, the liftgate, tie-downs, wiring, controls and service panels.

Technische Daten

Produkttyp Trunk umbrella holder
Compatible Models Tesla trunks with a flat mounting surface
Position / Location Trunk side wall or trim, clear of moving parts and service access
Material ABS plastic
Farbe Schwarz
Menge 1 holder
Abmessungen Approx. 19.5 × 6.6 × 6.1 cm overall; dimensions are not the usable umbrella opening
Installation Type Rear hook-and-loop fastening with illustrated mounting accessories

What's in the Box

  • 1×umbrella holder
  • 1×hook-side strip
  • 1×loop-side strip
  • 2×fixing screws

Installation

Difficulty
Moderate
Werkzeuge
Use the tools specified by the supplied mounting guide
  1. Choose a trunk position with handle and cargo clearance.
  2. Attach with the supplied strips and screws per the product guide. Do not drill or screw blindly into trim.
  3. Clean the mounting surface and connect the holder through the rear hook-and-loop strip.
  4. Remove the holder to empty any collected water outside the vehicle; dry it and the umbrella before storage.

Gut zu wissen

Achtung
  • The open top and side openings do not form a sealed water container. Empty collected water and dry the umbrella before storage.
  • Keep seat movement, liftgate clearance, tie-downs, controls, wiring and service access clear.
  • The holder is not a cargo anchor and not for heavy or sharp items.
  • Do not drill or insert screws blindly into vehicle trim.
Pflege
  • Empty any collected water outside the vehicle and wipe the ABS body clean.
  • Dry the holder, mounting strips and umbrella before storing.

FAQ

Will any umbrella fit?

It holds a folded umbrella; the illustrated 19.5 × 6.6 × 6.1 cm dimensions describe the outer body.

Is it a sealed water container?

No. It has an open top and visible side openings. Empty any collected water outside the car and dry the umbrella rather than relying on the holder to keep all luggage dry.

What comes in the illustrated set?

One holder, one hook-side strip, one loop-side strip and two fixing screws. Use the supplied mounting guide for the intended surface.

Where can I mount it?

On a trunk side surface that accepts the supplied fixing method, clear of moving parts, cargo and service access.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Umbrella holder
Material
ABS plastic
Installationsmethode
High-strength adhesive backing, no screws
Funktionen
Holds a wet umbrella and collects excess water

Bewertung schreiben

ABS Trunk Umbrella Holder with Adhesive Backing for Car Trunks
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
ABS Trunk Umbrella Holder with Adhesive Backing for Car Trunks

US$12.50

In den Warenkorb