TPE Protector for the Rear Trunk Sill
This contoured TPE cover adds a contact surface over the rear cargo-opening sill of the Model Y Juniper 2025.03+. Its edge seats at the existing seal groove without adhesive, and the central opening aligns with the latch. One protector and installation instructions are included. Model Y Standard and pre-Juniper Model Y are excluded.
- TPE Material
- Rear Trunk Sill
- Seal-Edge Seating
- 1 Protector
Hauptmerkmale
-
TPE Construction
A formed thermoplastic elastomer cover for the rear trunk sill.
-
Juniper Application
Designed for the Model Y Juniper 2025.03+ sill profile; Model Y Standard is excluded.
-
Seal-Edge Seating
The cover edge seats at the existing seal groove without adhesive.
-
Shaped Sill Coverage
The contoured strip follows the cargo-opening threshold rather than covering the full rear bumper.
-
Latch Opening
The central opening must align with the original latch and leave it clear.
-
Loading Contact Layer
Adds a removable surface where luggage passes over the rear sill.
Highlights
A Contoured Sill Cover
The formed strip follows the rear cargo threshold, with raised surface details and a central latch opening. This is a sill cover rather than a full rear-bumper guard.
Clear Space for the Latch
The center opening surrounds the original latch position, leaving the latch and seal uncovered.
An Extra Loading Surface
The cover sits where luggage passes across the trunk opening, adding a removable contact layer. The cover is not an impact barrier and does not prevent every scratch.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | 2025.03+ | Not compatible with Model Y Standard or pre-Juniper Model Y. |
Fits Model Y Juniper. Does not fit Model Y Standard or pre-Juniper Model Y.
Technische Daten
| Produkttyp | Rear trunk sill protector |
|---|---|
| Compatible Models | Model Y Juniper 2025.03+; excludes Model Y Standard and pre-Juniper Model Y |
| Position / Location | Rear cargo-opening sill at the existing seal edge |
| Material | TPE (thermoplastic elastomer) |
| Menge | 1 protector |
| Installation Type | Edge seated at the existing seal groove, without adhesive |
| Lieferumfang | 1 TPE protector and installation instructions |
| Care Instructions | Damp cloth and mild soap; avoid harsh solvents |
| Versandgewicht | 2.9 kg listed shipping weight |
What's in the Box
- 1×TPE trunk sill protector (Model Y Juniper specific)
- Installation instructions
Installation
- Open the tailgate while parked. Clean and dry the sill and the existing seal.
- Trial-position the cover across the sill. Match both ends and the latch opening before seating its edge.
- Seat the edge gently at the matching seal groove along its length. Do not cut or stretch the original seal or force an incorrect profile into place.
Gut zu wissen
Achtung
- Not compatible with Model Y Standard or pre-Juniper Model Y.
- Keep the tailgate latch, seal, drainage paths and tailgate closing clearance unobstructed. Do not cut, stretch or force the original seal to fit the cover.
- The cover is a contact layer for the sill, not an impact guard or a guarantee against scratches, cargo damage or water entry.
Pflege
- Wipe with a damp cloth and mild soap, then dry. Avoid abrasive cleaners and harsh solvents.
- Remove and clean beneath the cover as needed, keeping the seal and latch free of debris.
FAQ
Is this a complete rear-bumper cover?
It covers the rear trunk sill at the cargo opening. It does not cover the whole external bumper.
Does it fit Model Y Standard?
No. The application excludes Model Y Standard and pre-Juniper Model Y.
Does it use adhesive?
The cover edge seats at the existing seal groove without adhesive. The original seal is not altered.
English 
German 
Spanish 