XPE Front Trunk Mat for Tesla Model 3
Line the Model 3 front trunk with a removable black XPE mat. Its patterned cargo surface and raised perimeter are shown in the product photos. Versions fit Model 3 2017–2020, 2021–2023 and Highland 2024 onward.
- XPE Foam
- Front Trunk
- Raised Perimeter
- Three Model Versions
Hauptmerkmale
-
Version-Specific Selection
Separate versions for 2017–2020, 2021–2023 and Highland 2024 onward, each shaped to its frunk.
-
XPE Foam Material
The mat uses XPE foam for a removable liner in the front trunk.
-
Raised Perimeter
The illustrated raised edge surrounds the cargo surface; remove spills promptly rather than relying on unlimited liquid containment.
-
Textured Black Surface
The black, matte-style surface has a patterned cargo area, as shown in the product images.
-
Direct Placement
Set the matching liner into the frunk without drilling or additional fitting tools.
-
Removable for Cleaning
Lift the mat out for rinsing or wiping, let it dry fully and refit it flat.
Highlights
Raised Black Cargo Liner
The product view shows the patterned cargo surface and raised perimeter. Choose the matching model-specific liner; this appearance example is not a dimensional comparison of all three versions.
Front Trunk Placement
The installed example shows the liner seated within the frunk. It leaves closure, release and cargo attachment points accessible.
Lift Out for Cleaning
Remove the mat before rinsing or wiping. Let both the liner and storage area dry, then refit the mat flat.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017-2020 | Front trunk mat |
| Model 3 | 2021-2023 | Front trunk mat |
| Model 3 Highland | 2024-present | Front trunk mat |
Fits Model 3 2017–2020, 2021–2023 and Highland 2024 onward, one version each. Please Select is a selector placeholder.
Technische Daten
| Produkttyp | All-weather XPE front trunk mat |
|---|---|
| Compatible Models | Tesla Model 3 (2017-2020), Model 3 (2021-2023) and Model 3 Highland (2024-present) |
| Position / Location | Front trunk (frunk) |
| Material | XPE foam |
| Farbe | Black, matte finish |
| Installation Type | No tools required, direct placement |
| Care Instructions | Rinse with water or wipe with a damp cloth; air dry away from direct sunlight |
| Versandgewicht | 860 g (1.90 lb) |
What's in the Box
- Front trunk mat for the selected Model 3 version
Installation
- Remove any existing liner and clean and dry the storage area.
- Place the mat flat inside the frunk without folding its perimeter. Keep the latch, emergency release and attachment points accessible.
Gut zu wissen
Achtung
- Seat the mat flat and keep the hood latch, emergency release and any cargo attachment points accessible.
- Secure cargo separately and protect the liner from sharp edges. A mat does not secure loose loads, increase the frunk load limit or guarantee complete spill containment.
Pflege
- Remove the mat from the vehicle before rinsing or wiping. For stubborn dirt, use a neutral cleaner suitable for the liner under the product instructions. Air dry away from direct sunlight and refit only when dry.
FAQ
Which version should I choose?
Choose the Model 3 2017–2020, 2021–2023 or Highland 2024 onward version for your car.
Are fitting tools required?
No additional fitting tools are required for direct placement of a correctly matching liner.
Can the raised edge contain every spill?
No. It is not a sealed liquid container. Remove spills promptly, clean underneath the mat and dry both surfaces before refitting.
English 
German 
Spanish 