Rectangular Metal Badge With Radial Styling
This metal alloy badge has a radiating line design and pre-applied adhesive backing. It adds a decorative accent to a suitable flat panel. The badge does not change vehicle performance or identify an official trim level.
- Metal Alloy
- Radial Graphic
- Adhesive Backing
- One Badge
Hauptmerkmale
-
Metal Alloy Badge
A rectangular decorative badge with a shiny finish
-
Radial Graphic
The face carries a radiating line pattern
-
Adhesive Backing
Pre-applied adhesive attaches the badge to a suitable surface
-
Decorative Use
The badge adds styling; it does not change performance or vehicle trim
-
Surface Fit
Needs a flat panel area for full adhesive contact.
-
One Badge
The package description lists one badge with installation instructions
Highlights
Radiating Line Design
The rectangular badge has a shiny radial pattern. The display photo illustrates the design.
Adhesive Attachment
Pre-applied adhesive attaches the badge. Clean and dry a compatible surface, test the position, then apply even pressure for the specified 30 seconds.
Plan The Placement
Use sufficient flat area for complete contact.
Decorative Styling
Launch-edition-inspired styling describes its appearance. The badge does not establish official Launch Edition status, Tesla manufacture or added performance.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Surface-mounted accessory | Flat panel area with full adhesive contact |
Vehicle model names do not guarantee suitable placement. Dimensions are not provided.
Technische Daten
| Produkttyp | Metal tail badge emblem, launch-edition-inspired style |
|---|---|
| Compatible Models | Surface-mounted styling accessory |
| Position / Location | Suitable flat panel, clear of sensors and moving parts |
| Material | Metal alloy |
| Menge | 1 badge |
| Installation Type | Peel-and-stick with pre-applied adhesive backing |
| Lieferumfang | 1 metal tail badge emblem with pre-applied adhesive backing and installation instructions |
| Versandgewicht | 60 g (0.13 lb) |
What's in the Box
- 1×Metal tail badge emblem with pre-applied adhesive backing
- Installation instructions
Installation
- Choose a sufficiently flat location that does not obstruct sensors, lights, charging access or moving panels.
- Clean and dry the area. Test the badge position with the liner still on and mark alignment if needed.
- Remove the liner without touching the adhesive. Align once and press evenly from the center toward the edges for the specified 30 seconds.
- Keep the area dry and avoid washing for the initial 24 hours; follow the actual adhesive curing guidance.
Gut zu wissen
Achtung
- Choose a surface compatible with the adhesive and any cleaning products.
- Avoid washing or rain exposure for the initial 24 hours as instructed, and follow the actual adhesive curing guidance.
- Removal can affect paint, wraps or coatings. Removal can leave marks.
Pflege
- Use mild car wash soap and a soft cloth; avoid directing a high-pressure jet at the edges.
FAQ
Does the badge make my vehicle a Launch Edition?
No. It is a decorative styling badge and does not alter the vehicle trim, performance or factory status.
Where can I place it?
On a sufficiently flat, adhesive-compatible surface with clearance from sensors, cameras, lights and moving parts.
What is in the package?
One metal badge with pre-applied adhesive backing and installation instructions.
Can it be removed without marks?
Mark-free removal is not claimed. Use a removal method compatible with the adhesive and the vehicle paint, wrap or coating.
English 
German 
Spanish 