Footwell Lighting You Control With a Touch
Replace the stock footwell lamps with touch-controlled RGB modules. Tap the circular area on a module to change the synchronized color or mode, with the last setting saved. Choose a two-piece kit for the front footwells or four pieces for front and rear. Fits Model 3, Model Y and Model S 2021+.
- RGB LED
- Touch Control
- Synced Lights
- 2 or 4 Pieces
Hauptmerkmale
-
Synchronized Control
Touch the circular area on any module and every installed light changes color and mode together
-
Three Lighting Modes
Choose static color in 7 solid colors, a breathing pulse, or a smooth color cycle
-
Setting Memory
The last mode you used is saved and returns the next time you drive
-
Plug-And-Play Fit
The modules replace the stock footwell lamps and connect with the included wiring harness
-
Two Kit Sizes
The 2-piece kit lights the front footwells; the 4-piece kit adds the rear passengers
-
Replacement Modules
The light modules fit in place of the matched stock footwell lamps and connect through the kit harness.
Highlights
One Touch, All In Sync
A single touch on any module changes the color and mode across all installed lights, so there is no need to adjust each light separately.
Three Lighting Modes
Pick static color from 7 solid colors, a gentle breathing pulse, or a color cycle that flows through smoothly changing colors. The last setting is saved.
Plug-And-Play Replacement
The replacement modules connect with the kit wiring harness at the original lamp opening.
Front Or Full-Cabin Kits
The 2 PCS kit lights the driver and passenger footwells with 2 modules and a front harness. The 4 PCS kit adds the rear footwells with 4 modules and a full harness.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | RGB footwell modules | |
| Model Y | RGB footwell modules | |
| Model S | 2021+ | RGB footwell modules |
Fits Model 3, Model Y and Model S 2021+.
Technische Daten
| Produkttyp | Touch-controlled RGB footwell LED light modules, plug-and-play |
|---|---|
| Compatible Models | Model 3; Model Y; Model S 2021+ |
| Position / Location | Front footwells (2-piece kit); front and rear footwells (4-piece kit) |
| Menge | 2 pieces or 4 pieces |
| Light Source | RGB LED |
| Lighting Modes | Static color (7 solid colors), breathing, color cycle |
| Control Method | Touch the circular area on any light; all lights stay in sync and the last setting is saved |
| Installation Type | Replaces the stock footwell lights; plug-and-play with wiring harness |
| Lieferumfang | 2 PCS: 2 LED modules and 1 front wiring harness; 4 PCS: 4 LED modules and 1 front and rear wiring harness |
What's in the Box
- 2 PCS kit: 2 x RGB LED modules, 1 x front wiring harness
- 4 PCS kit: 4 x RGB LED modules, 1 x full front and rear wiring harness
Installation
- Carefully release the stock lamp with a plastic pry tool.
- Disconnect the stock lights from their connectors.
- Plug the new RGB modules into the connectors using the included wiring harness.
- Route the harness clear of pedals and seat travel, secure the modules and test color and mode while parked.
Gut zu wissen
Achtung
- Fits Model 3, Model Y and Model S 2021+.
- Use a plastic pry tool and release the lamp carefully. Disconnect the plug before pulling the light away; avoid straining the wiring.
- Route the harness clear of pedals and seat movement.
- Choose colors and modes while parked, and set the light for comfortable driving visibility.
Pflege
- Keep the touch areas clean and dry.
FAQ
How do I control the lights?
Touch the circular touch-sensitive area on any installed light. A short tap cycles through colors and modes, all lights change in sync, and your setting is saved for next time.
What is the difference between the 2 PCS and 4 PCS kits?
The 2 PCS kit includes 2 modules and a front harness for the driver and passenger footwells. The 4 PCS kit includes 4 modules and a full front and rear harness.
How difficult is the installation?
The kit replaces the stock footwell lamps and connects through its harness.
English 
German 
Spanish 