A Sculpted Accent Around Your Side Camera
A left-and-right pair of molded ABS decorative covers with a pointed upper edge and layered fins for HW3.0 side-camera housings. Five finishes are available: glossy or matte carbon-fiber pattern, glossy or matte black, and red. The original camera assembly remains in place.
- Left + Right Pair
- Molded ABS
- 5 Finishes
- Pre-Applied Adhesive
Hauptmerkmale
-
Layered Fins
Pointed upper edge and sculpted fins form the Thunder exterior accent
-
Five Finishes
Glossy and matte carbon-fiber patterns, glossy and matte black, or red
-
Molded ABS
Carbon-fiber options are patterned ABS rather than solid carbon fiber
-
Left and Right Pair
One cover for each side in one selected finish
-
Adhesive Backing
Pre-applied adhesive is part of each cover
-
Original Camera Retained
The decorative covers surround the housing; the original camera assembly stays in place
Highlights
Layered Fins in a Left-and-Right Pair
The detached covers show a pointed outline, camera-shaped opening and layered fins in a carbon-fiber-pattern finish. The pattern is on molded ABS. One pair includes a left cover and a right cover.
A Red Finish Option
The red pair shows the same pointed outline, camera-shaped openings and sculpted fins. Each pair is supplied in one selected finish.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2019.4–2023.9 | HW3.0 side camera housing only |
| Model Y | 2020–2023 | HW3.0 side camera housing only |
Fits the HW3.0 housing versions listed above. Does not fit HW4.0 camera housings. Tesla vehicle guidance prohibits accessories on or near sensors and cameras.
Technische Daten
| Produkttyp | Thunder side camera decorative cover pair |
|---|---|
| Compatible Models | Model 3 2019.4–2023.9, Model Y 2020–2023 (HW3.0 only) |
| Position / Location | Front fender side camera housing, left and right |
| Material | Molded ABS |
| Surface Finish | Glossy or matte |
| Farbe | Glossy Carbon Fiber pattern, Matte Carbon Fiber pattern, Glossy Black, Matte Black, Red |
| Menge | 1 pair (1 left + 1 right) |
| Installation Type | Pre-applied adhesive backing |
| Lieferumfang | 1 left cover + 1 right cover in the selected finish |
| Versandgewicht | 150 g (0.3 lb) |
What’s in the Box
- 1×Left side camera cover
- 1×Right side camera cover
Installation
FAQ
Are the carbon-fiber finishes solid carbon fiber?
No. All five finishes use molded ABS; the two carbon-fiber choices are patterned surface finishes.
What is included?
One left cover and one right cover in one selected finish, with pre-applied adhesive backing. Cameras, the vehicle and other trim are not included.
Does the cover replace the camera?
No. It is a decorative piece around the housing. The original camera remains in place.
Which camera version is this cover designed for?
HW3.0 side-camera housings on Model 3 2019.4–2023.9 and Model Y 2020–2023. It does not fit HW4.0 housings.
What finishes are available?
Glossy carbon-fiber pattern, matte carbon-fiber pattern, glossy black, matte black and red. All five finishes use molded ABS.
English 
German 
Spanish 