Real Dry Carbon Fiber Overlays for Model S and Model X Mirrors
This vehicle-specific left and right pair adds a full carbon fiber outer surface to compatible Model S and Model X mirrors without replacing the factory housings. The overlay is made from real dry carbon fiber with a woven surface, follows the mirror cap shape and is secured by pre-applied automotive adhesive, with no drilling. Choose a glossy or matte finish.
- Real Dry Carbon Fiber
- Left and Right Pair
- Pre-Applied Adhesive
- No Drilling
- Glossy or Matte
Hauptmerkmale
-
Real Dry Carbon Fiber
A genuine woven carbon fiber surface rather than ABS with a printed graphic
-
Full Outer-Cap Overlay
The cover sits over the painted factory cap and leaves the mirror glass and pivot area exposed
-
Pre-Applied Adhesive
Shaped edges and automotive adhesive secure the overlay with no drilling or disassembly
-
Left and Right Pair
Each option includes one driver-side cover and one passenger-side cover
-
Model-Year Specific Shapes
Separate covers for Model S 2014-2020, Model S 2021+ and Model X 2021+
-
Glossy or Matte Finish
The same woven carbon in a deep shine or a lower-reflection surface
-
Folding Clearance
The covers follow the mirror cap shape and clear the folding pivot
Highlights
A Carbon Surface, Not a Print
The full-cap overlay is a genuine woven carbon fiber surface rather than ABS plastic printed with a carbon-style graphic.
Add-On, Not a Replacement
The cover sits over the painted factory cap and leaves the mirror glass, lower trim and pivot area exposed, so the original housing stays on the vehicle.
Two Levels of Reflection
Glossy gives a deep shine with a defined weave, while matte keeps the pattern visible with less glare and fewer sharp highlights.
Matched to Your Model Year
Mirror shapes differ between generations, so separate options are offered for Model X 2021+, Model S 2021+ and Model S 2014-2020.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model X | 2021+ | Glossy or matte |
| Model S | 2021+ | Glossy or matte |
| Model S | 2014-2020 | Glossy or matte |
Fits Model X 2021+ and Model S 2014+. Does not fit Model X 2020 or earlier, Model S 2012-2013, Model 3 or Model Y.
Technische Daten
| Produkttyp | Full-cap mirror overlay (does not replace the factory housing) |
|---|---|
| Compatible Models | Model X 2021+, Model S 2021+, Model S 2014-2020 |
| Position / Location | Outer side mirror caps, driver and passenger sides |
| Material | Real dry carbon fiber with a woven appearance |
| Surface Finish | Glossy or Matte carbon fiber |
| Menge | 2 pieces (1 driver-side and 1 passenger-side) |
| Installation Type | Shaped edges with pre-applied automotive adhesive; no drilling |
| Lieferumfang | 2 mirror-cap overlays: 1 driver-side cover and 1 passenger-side cover |
| Versandgewicht | 300 g (0.66 lb) |
What's in the Box
- 2×Mirror-cap overlays (1 driver-side, 1 passenger-side)
Installation
- Pair the left and right covers with the corresponding mirrors, with the adhesive liner still on.
- Remove dust, wax, oil and detailing-product residue from the painted cap and lower edge, then dry it fully.
- Test-fit with the liner intact.
- Peel the liner, keep the cover centered and lower the shaped edges over the factory cap without forcing them.
- Remove the liner and press the adhesive areas evenly.
Gut zu wissen
Achtung
- Not for Model X 2020 or earlier, Model S 2012-2013, Model 3 or Model Y.
- Test both covers with adhesive liners intact; stop if an edge reaches the mirror glass or folding pivot.
Pflege
- Wipe gently with a soft damp microfiber cloth and dry the surface afterward.
- Avoid abrasive pads, harsh solvents and concentrated pressure at the perimeter of the overlay.
FAQ
Are these real carbon fiber or carbon-look ABS?
They are made from real dry carbon fiber. The glossy and matte choices describe the surface finish, not to a printed plastic pattern.
Do these replace the original mirror caps?
No. They are add-on overlays installed over the painted factory mirror caps, and the original housings remain on the vehicle.
Does the package include both sides?
Yes. Each vehicle-and-finish option includes two pieces: one driver-side cover and one passenger-side cover.
Will the mirrors still fold?
The cover sits on the outer factory cap and is shaped to leave the mirror glass and pivot areas clear. Test the folding movement after installation and stop if the cover contacts surrounding trim.
English 
German 
Spanish 