Sharper Mirror Lines in Dry Carbon Fiber
Add a sporty outer profile with a left/right pair of dry carbon-fiber mirror overlays. The compatible factory caps stay underneath. Available in glossy woven, matte woven or glossy forged finish for each listed vehicle group.
- Dry Carbon Fiber
- Overlay Fit
- Glossy, Matte or Forged
- Model-Specific
Hauptmerkmale
-
Dry carbon-fiber caps
A molded overlay pair changes the visible upper surface of the exterior mirrors.
-
Vehicle-specific options
Choose the Model 3/Highland, original Model Y, or Juniper/Model YL vehicle group.
-
Glossy woven finish
A reflective clear surface emphasizes the regular woven pattern.
-
Matte woven finish
Choose a lower-reflection woven finish for a different visual treatment.
-
Glossy forged finish
The irregular flake pattern varies naturally between parts.
-
Factory cap remains
The covers bond over the compatible original caps rather than replacing the mirror assembly.
Highlights
Glossy Woven Pair
The regular woven pattern has a reflective surface. The paired view illustrates left and right covers; choose the correct vehicle mold separately.
Matte Woven Pair
A lower-reflection woven treatment gives a different finish.
Glossy Forged Pair
The irregular flake pattern provides a non-woven appearance. Pattern placement varies between the left and right pieces and production batches.
Overlay Fit and Clearance
The original cap stays underneath.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023.10 | Shared mold with Model 3 Highland |
| Model 3 Highland | 2024+ | Shared mold with Model 3 (2017–2023.10) |
| Model Y | 2020–2025.03 | Pre-refresh mold |
| Model Y Juniper | 2025+ | Shared mold with Model YL |
| Model YL | 2026+ | Shared mold with Model Y Juniper |
Model Y built through March 2025 uses the pre-refresh mold; Model Y Juniper 2025+ shares its mold with Model YL.
Technische Daten
| Produkttyp | Dry carbon fiber overlay mirror caps, sporty full-cap profile |
|---|---|
| Compatible Models | Model 3 (2017–2023.10), Model 3 Highland (2024+), Model Y (2020–2025.03), Model Y Juniper (2025+), Model YL (2026+) |
| Position / Location | Exterior mirrors, left and right, over the factory mirror caps |
| Material | Dry carbon fiber |
| Surface Finish | Glossy carbon fiber, matte carbon fiber or glossy forged carbon fiber |
| Pattern / Weave | Woven (glossy or matte) or forged flake pattern |
| Installation Type | Adhesive overlay over compatible factory mirror caps |
| Versandgewicht | 290 g (0.64 lb) |
What's in the Box
- 1×Left mirror-cap overlay
- 1×Right mirror-cap overlay
Installation
- Remove wax, oil, dust and moisture with a surface-safe cleaner and work at a suitable temperature.
- Dry-fit both sides with the liner intact.
- Align the long outer edge first, expose the adhesive progressively and avoid trapping stress.
- Press the full perimeter evenly, allow the bond to set and recheck after several fold cycles.
Gut zu wissen
Achtung
- Stop if a cap rocks, needs force or leaves an uneven perimeter gap; do not compensate with extra tape.
- Dry-fit and test folding while parked; an overlay is not a guarantee of unchanged clearance on every shell.
Pflege
- Weave direction, scale, resin tone and clearcoat can differ between carbon products or batches.
FAQ
Does it fit Model Y Juniper and Model YL?
Yes. The selector includes a dedicated Model Y Juniper 2025+ and Model YL 2026+ mold. Select that group rather than the pre-refresh Model Y option.
Will mirror folding still work?
Yes. The cap keeps normal mirror folding.
Can it be removed later?
Removal effort and residue vary with surface preparation, bond time, temperature and paint condition. Use careful detailing technique; residue-free removal cannot be guaranteed.
Does one order cover both exterior mirrors?
The cap set contains a matched left and right overlay. Identify and dry-fit both pieces before exposing the adhesive.
English 
German 
Spanish 