Black Silicone Side Mirror Trim Strip
A flexible black silicone accent strip for the exterior side mirror housing. Adhesive tape attaches it along the housing contour. The listed vehicle applications are shown below.
- Black Silicone
- Flexible Strip
- Adhesive Attachment
Hauptmerkmale
-
Flexible Silicone
The soft strip bends to follow the mirror-housing contour.
-
Black Accent
The narrow black strip adds a contrasting line along the exterior mirror housing, as shown in the installed example.
-
Adhesive Attachment
The strip uses adhesive tape to attach to a clean, dry housing surface.
-
Housing Trim
The strip is an exterior accent for the mirror housing, separate from the reflective glass and the complete mirror assembly.
-
Vehicle Selection
The listed applications include Model 3 and Highland, Model Y, Model S, Model X and Cybertruck; the actual housing contour and available clearance must match.
Highlights
A Narrow Black Accent
The installed example shows the strip along the outer mirror housing, with the mirror and its signal lens remaining separate from the trim. Match placement to your actual housing.
Flexible Silicone Profile
The soft silicone bends in the example to follow the housing curve, leaving the glass, signal lens and folding path clear.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | Including Highland | |
| Model Y | ||
| Model S | ||
| Model X | ||
| Cybertruck |
Fits the listed vehicle applications with the original mirror housing. Modified or differently shaped mirrors are not covered.
Technische Daten
| Produkttyp | Side mirror trim strip cover |
|---|---|
| Compatible Models | Model 3 including Highland, Model Y, Model S, Model X and Cybertruck; subject to housing contour and clearance |
| Position / Location | Exterior side mirror housing |
| Material | Silicone |
| Farbe | Schwarz |
| Installation Type | Adhesive tape attachment |
| Versandgewicht | 110 g |
Installation
- Place the strip along the mirror housing without covering the mirror glass, signal lens or any nearby sensor.
- Clean and dry a suitable housing surface, then apply the adhesive strip.
Gut zu wissen
Achtung
- Keep the mirror glass, turn-signal lens and any nearby camera or sensor clear.
- The strip does not prevent a collision or protect the mirror assembly from impact. Adhesive removal and reapplication may affect the surface and bond.
FAQ
What is the strip made from?
Silicone in the black color option. The strip is flexible and uses adhesive tape for attachment.
Does it replace the mirror cover or glass?
No. It is a narrow trim strip attached to the exterior housing; the original mirror assembly remains in place.
Will it fit every mirror in the listed model families?
It fits the original mirror housings of the listed models. Modified or differently shaped mirrors are not covered.
English 
German 
Spanish 