TPE Front Trunk Mat for Model Y Juniper
A black matte TPE mat for the Model Y Juniper front trunk from March 2025 onward. Its molded perimeter and ribbed base provide a removable surface beneath everyday storage items. Place it directly in the frunk and lift it out for cleaning. This version does not fit the Model Y Standard.
- Model Y Juniper
- Front Trunk
- TPE
- Direct Placement
Hauptmerkmale
-
Juniper Frunk Application
Shaped for the front trunk of the Model Y Juniper from March 2025 onward; the Model Y Standard is excluded.
-
TPE Construction
Thermoplastic elastomer provides a removable lining for everyday front-trunk storage.
-
Raised Perimeter
A molded edge surrounds the storage surface to help contain small spills and loose dirt.
-
Ribbed Surface
Longitudinal molded ribs run across the base of the mat.
-
Direct Placement
The mat rests in the frunk without drilling or added fasteners.
-
Removable for Cleaning
Lift the mat out to wipe or rinse it, then let it dry before refitting.
Highlights
Molded Frunk Mat
The complete mat has a rounded rectangular outline, raised perimeter and longitudinal ribs. Match this shape to your vehicle’s front trunk.
Installed Front-Trunk View
The mat sits in the base of the frunk.
Single Front-Trunk Application
This item lines the front trunk. Rear-trunk and passenger-floor mats are separate products.
Remove to Clean
Lift the mat out to wipe or rinse away dirt. Dry both the mat and the frunk before placing it back.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | March 2025 onward | Front trunk only. Does not fit Model Y Standard. |
For the Model Y Juniper front trunk from March 2025 onward. Does not fit the Model Y Standard or earlier Model Y front-trunk designs.
Technische Daten
| Produkttyp | Front trunk mat |
|---|---|
| Compatible Models | Model Y Juniper, March 2025 onward; excludes Model Y Standard |
| Position / Location | Front trunk (frunk) |
| Material | TPE (thermoplastic elastomer) |
| Surface Finish | Matte, with longitudinal molded ribs |
| Farbe | Schwarz |
| Installation Type | Direct placement; no tools required |
| Care Instructions | Remove to rinse or wipe clean; air dry before refitting |
What's in the Box
- 1×Front trunk mat
Installation
- Remove loose items and any other loose liner from the frunk. Clean the base and let it dry.
- Place the mat directly in the frunk, following the compartment outline without forcing or folding the edge.
- The mat leaves the hood latch, hinges and access points unobstructed.
- Return stored items within the vehicle storage limits and secure them independently of the mat.
Gut zu wissen
Achtung
- Does not fit the Model Y Standard or earlier Model Y front-trunk designs.
- Do not stack the mat over another loose liner.
- Secure stored items separately and follow the vehicle storage limits. The mat is not a cargo restraint, and liquid can overflow its edge.
Pflege
- Remove the mat before rinsing; keep water out of vehicle electrical and access areas.
- Wipe with a damp cloth or use a neutral cleaner for stubborn dirt.
- Air dry away from prolonged direct sunlight, then refit only when dry. Store clean and dry when not in use.
FAQ
Which Model Y is this mat for?
It is for the Model Y Juniper front trunk from March 2025 onward. The Model Y Standard and earlier Model Y front-trunk designs are excluded.
What is included?
One front trunk mat. Rear-trunk and passenger-floor mats are separate products.
Do I need tools to install it?
No. It sits directly in the front trunk. It follows the compartment shape and leaves the latch, hinges and access points clear.
How should I clean it?
Remove it to rinse or wipe it clean. Use a neutral cleaner if needed and let it air dry before refitting.
Will the mat hold cargo in place?
Secure stored items separately and follow the vehicle storage limits. The ribbed surface and raised edge do not replace cargo restraints.
English 
German 
Spanish 