Connected Trunk and Seatback Coverage for the Highland
This TPE liner combines the Model 3 Highland cargo floor with connected rear seatback sections in one assembly. The upper sections are split, with a ribbed transition near the floor connection. A floor-handle cutout preserves a grip for under-floor access, and hook-and-loop patches attach the seatback portions to the intended fabric.
- Highland 2024+
- TPE Liner
- Connected Design
- Handle Cutout
Hauptmerkmale
-
Integrated Coverage
The cargo-floor portion connects to the rear seatback sections as one liner assembly, providing a continuous surface through the lower transition.
-
Split Seatback Shape
A central opening separates the upper rear seatback portions, with ribbed flexible areas near the floor connection to follow seat movement.
-
TPE Surface
The molded TPE liner has long grooves and shaped side edges; it places a cleanable layer over the listed cargo-area surfaces.
-
Floor Handle Access
The handle cutout leaves a grip for raising the original cargo floor panel.
-
Hook-and-Loop Patches
Backing patches on the rear seatback sections attach to the intended carpet fabric; press them in place without covering releases or latches.
-
Simple Cleaning
Wipe debris and marks from the surface with a damp cloth or clean water, and dry the liner before refitting it.
Highlights
One Connected Liner Assembly
The standalone outline shows the cargo floor, shaped sides and two upper seatback portions joined at the lower transition, shaped to the Highland cargo area.
Reach the Floor Panel Handle
The reference shows the original floor panel lifting with the liner resting on it. The cutout gives access to the handle.
Split Seatback Sections
A central split and ribbed transition follow the rear seatback layout.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | Cargo floor and cargo-facing rear seatbacks. |
For the refreshed Highland cargo layout. Latches, release controls, belts, restraint anchors and vents stay clear.
Technische Daten
| Produkttyp | Integrated cargo floor and rear seatback liner |
|---|---|
| Compatible Models | Model 3 Highland 2024+ |
| Position / Location | Trunk floor and cargo-facing rear seatbacks |
| Material | TPE |
| Menge | 1 integrated liner assembly |
| Installation Type | Lay-in floor section; hook-and-loop seatback patches |
| Care Instructions | Damp cloth or clean water; dry before refitting |
| Design | Split upper seatback sections; ribbed transition and floor-handle cutout |
What's in the Box
- 1×integrated trunk liner with rear seatback sections
Installation
- Remove the existing loose trunk mat and clean debris from the cargo floor and seatback fabric.
- Lay the liner floor section flat and align the floor-panel handle cutout.
- Align the connected seatback sections and press their backing patches onto the intended fabric without covering controls or anchors.
- Adjust edges without stretching the liner across hinges or latches.
Gut zu wissen
Achtung
- Keep seat release controls, latches, belts, restraint anchors and vents accessible.
- The cargo floor panel opens through the handle cutout.
- Cargo liners do not secure luggage or guarantee a watertight trunk; restrain loads appropriately and clean spills promptly.
Pflege
- Wipe with a damp cloth or clean water; clean spills promptly and dry before refitting.
- Allow packaging creases to settle naturally.
FAQ
Which vehicle is it designed for?
The Model 3 Highland from 2024 onward, covering the cargo floor and cargo-facing rear seatbacks.
Can I still open the lower storage compartment?
Yes. The liner has a floor-handle cutout and the original panel lifts with the liner on it.
Can I fold the rear seats?
Yes. The upper seatback sections are split for each seat.
How do I clean the liner?
Wipe with a damp cloth or clean water, clean spills promptly and allow it to dry before refitting.
English 
German 
Spanish 