Carbon Fiber Rear Bumper Aprons for Model S Plaid
Add a pair of gloss carbon fiber aprons to the left and right lower rear bumper areas of a matching 2022–2024 Model S Plaid. The 3K twill pieces have a sculpted fin profile and are supplied with an adhesive and installation kit, including securing screws. Trial-fit both sides before bonding or making screw holes.
- 3K Twill Carbon
- Gloss Finish
- Left + Right Pair
- Plaid 2022–2024
Hauptmerkmale
-
Left and Right Pair
The set contains two shaped rear bumper aprons for the two sides.
-
Carbon Fiber Construction
The aprons use 3K twill carbon fiber with a wet-carbon process.
-
Gloss Finish
A clear-coated gloss surface shows the carbon weave.
-
Rear Bumper Styling
The sculpted fins add detail to the lower rear bumper area.
-
Model S Plaid Option
The selectable version fits the 2022–2024 Model S Plaid.
-
Tape and Screw Attachment
The supplied adhesive and installation kit includes securing screws.
Highlights
A Matched Pair of Shaped Aprons
The two illustrated parts have left- and right-side profiles with raised fins.
Backside Attachment Areas
The underside example shows the shaped bonding areas and tape backing. This view shows the mating surfaces.
Styling and Retention
These are decorative bumper additions. The carbon weave and fin shape do not establish extra downforce, impact protection or a high-speed retention rating.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model S Plaid | 2022–2024 | Fits the refresh rear bumper. |
Fits Model S Plaid 2022–2024 with the refresh rear bumper only.
Technische Daten
| Produkttyp | Carbon fiber rear bumper aprons |
|---|---|
| Compatible Models | Model S Plaid 2022–2024, matching refresh rear bumper |
| Position / Location | Left and right lower rear bumper areas |
| Material | 3K twill carbon fiber |
| Surface Finish | High-gloss clear coat |
| Pattern / Weave | 3K twill weave |
| Menge | 1 pair, left and right |
| Gewicht | 1.47 kg shipping weight; not the net apron weight |
| Installation Type | Adhesive tape and supplied securing screws |
What's in the Box
- 1×Pair of carbon fiber rear bumper aprons, left and right
- 1×Adhesive and installation kit with securing screws
Installation
- Trial-fit the left and right aprons on a clean bumper.
- Identify the specified bonding and screw locations using the supplied mounting instructions.
- Prepare the bonding surfaces with a method suitable for the bumper finish. Align the pieces, apply the adhesive attachment and fit the securing screws as instructed.
- Allow the adhesive attachment to set under its applicable instructions, then inspect both pieces for secure attachment and clearance. Recheck the attachment after initial use and during cleaning.
Gut zu wissen
Achtung
- Screw attachment can modify the bumper and is not a no-drill or damage-free promise.
- Stop using the vehicle with a loose or protruding apron until its attachment is corrected. Tape alone is not a substitute for the specified combined mounting method.
Pflege
- Clean gently with a method suitable for the clear-coated carbon and bumper finish. Avoid scraping the fins or directing a pressure-washer jet at their adhesive edges.
FAQ
What is included?
One left/right pair of carbon fiber rear bumper aprons and an adhesive/installation kit with securing screws.
Is this a tape-only installation?
The supplied mounting method uses adhesive and securing screws. Screw attachment can modify the bumper.
Does it fit every Model S bumper?
No. It fits the 2022–2024 Model S Plaid rear bumper only.
Is the 1.47 kg value the net carbon-part weight?
It is the shipping weight, not the net weight of the apron pair.
English 
German 
Spanish 