A Highland-Specific Real Carbon Fiber Front Lip Splitter
This real 3K twill carbon-fiber front lip follows the lower edge of the standard Model 3 Highland bumper. Available in Glossy or Matte.
- Real 3K Carbon Fiber
- Highland-Specific Fit
- 3M Tape Install
- No Drilling
- Glossy or Matte
Hauptmerkmale
-
Real carbon fiber
Listed as genuine 3K twill carbon fiber, rather than a printed carbon pattern.
-
Highland bumper
Intended for Model 3 Highland 2024+ with the standard bumper; excludes Performance.
-
Tape mounting
Listed with pre-applied automotive-grade 3M tape and no drilling or screws.
-
Finish choices
Available in Glossy or Matte carbon fiber.
-
Lower bumper profile
Extends below the factory bumper.
Highlights
Visible carbon weave
The splitter is listed as genuine 3K twill carbon fiber. The close-up shows the exposed weave and shaped edge.
Standard Highland bumper
Designed for Model 3 Highland 2024+ with the standard bumper. It does not fit Highland Performance or the 2017–2023 Model 3.
Shaped lower lip
The supplied splitter follows the lower bumper outline. The listing specifies pre-applied automotive-grade 3M tape, without drilling or screws.
Lower profile
The lip sits below the original bumper.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | Standard bumper, not Highland Performance |
Fits Model 3 Highland 2024+ with the standard bumper. Does not fit the 2017–2023 Model 3 or Model 3 Highland Performance.
Technische Daten
| Produkttyp | Carbon fiber front lip splitter |
|---|---|
| Compatible Models | Model 3 Highland (2024+), not Highland Performance |
| Position / Location | Front bumper lower edge |
| Material | Real 3K twill weave carbon fiber |
| Surface Finish | Glossy or Matte carbon fiber |
| Installation Type | Pre-applied automotive-grade 3M adhesive tape; no drilling or screws |
| Drilling Required | Nein |
Installation
- Prepare a clean, dry mounting surface and test the alignment before removing the tape liner.
- Mount using the specified pre-applied tape.
Gut zu wissen
Achtung
- Not for Model 3 Highland Performance or the 2017–2023 Model 3.
- The splitter extends slightly lower than the factory bumper; take care on steep driveways and high speed bumps.
FAQ
Is this real carbon fiber?
Yes. It is manufactured from genuine 3K twill weave carbon fiber, not ABS plastic with a printed pattern or a vinyl overlay.
Will ground clearance be affected?
The splitter extends slightly lower than the factory bumper. Take care with steep driveways or high speed bumps.
How is it installed?
The listing specifies pre-applied automotive-grade 3M adhesive tape, with no drilling or screws.
Does it fit Model 3 Highland Performance?
No. It is not compatible with Model 3 Highland Performance or the 2017–2023 Model 3.
English 
German 
Spanish 