TPE Front-Trunk Liner for Model YL Six-Seater
This removable TPE mat adds a surface layer to the pictured Model YL six-seater front-trunk base. A raised perimeter and molded channels help manage everyday dirt and small spills. Fits Model YL 2026+. One mat is supplied, and it can be removed for rinsing and drying.
- Model YL Six-Seater
- TPE Material
- Raised Perimeter
- One Frunk Mat
Hauptmerkmale
-
Front-Trunk Liner
The mat covers the pictured base area of the front trunk
-
YL-Specific Listing
This option is listed for the Model YL 2026+ six-seater
-
TPE Material
Thermoplastic elastomer forms the removable mat
-
Raised Perimeter
The border helps contain ordinary dirt and small spills within the mat area
-
Textured Surface
Molded channels run across the mat surface
-
Removable Cleaning
Lift the mat out to rinse it and dry before refitting
Highlights
Shaped Front-Trunk Mat
The mat has a rounded rectangular outline, raised border and molded surface channels. It is shaped to the front-trunk base.
Pictured Frunk Position
The installed example shows the liner at the front-trunk base. It leaves latch, release, seals and service access clear.
Ordinary Dirt And Small Spills
Raised edges help keep everyday dirt and small spills within the mat area. They do not guarantee complete leak containment or secure cargo in place.
Remove, Rinse And Dry
Lift the mat out to clean it, rinse as needed and let it dry before refitting. Do not wash it in place or use a direct heater to reshape it.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model YL 6-Seater | 2026+ | Matching front-trunk base required |
This product is listed for the Model YL six-seater 2026+ front-trunk base. Does not fit other Model Y versions. This is one frunk mat, not a cabin or rear-trunk mat set.
Technische Daten
| Produkttyp | TPE front-trunk mat |
|---|---|
| Compatible Models | Model YL 2026+ six-seater front-trunk base |
| Position / Location | Front trunk (frunk) base |
| Material | TPE (thermoplastic elastomer) |
| Menge | 1 mat |
| Installation Type | Drop-in liner; no adhesive |
| Care Instructions | Remove, rinse and air dry before refitting |
| Versandgewicht | 500 g (1.10 lb) |
| Design | Raised border and molded surface channels |
What's in the Box
- 1×Front-trunk mat
Installation
- Empty the frunk.
- Place the liner flat on the base without stacking it over another mat or forcing the edges.
- Load items within the vehicle requirements and use suitable separate cargo restraint.
Gut zu wissen
Achtung
- Fits Model YL six-seater. Does not fit other Model Y versions.
- The mat sits flat and leaves the hood latch, emergency-release access, seals and service access clear.
- The textured surface is not a cargo restraint and the liner does not increase the vehicle load limit.
- Raised edges do not guarantee complete leak containment. Remove spills promptly and take the mat out before rinsing; dry fully before refitting. Avoid direct heater or hair-dryer use to reshape it.
Pflege
- Wipe as needed or remove for rinsing with a suitable mild cleaner. Air dry before refitting.
FAQ
Is this a full mat set?
No. One front-trunk mat is supplied. Cabin and rear-trunk mats are separate items.
Can I order it for another Model Y version?
No. It fits Model YL six-seater 2026+ only.
Does it keep cargo from moving?
The textured liner is not a cargo restraint. Secure items suitably and stay within the vehicle load requirements.
How should I clean or flatten it?
Remove it for rinsing and dry before refitting. Let any transport folds relax while laid flat; avoid direct heaters or hair dryers.
English 
German 
Spanish 