Hidden Console Charging Dock with Retractable Cables
A console charging module for the listed Highland, Juniper and Model YL 6-Seater applications, with dual retractable device cables and a magnetic pad described for Apple Watch charging. Choose Type-C + Type-C or Lightning + Type-C. The cable ends can be stored in the console layout when not in use.
- Dual retractable cables
- Apple Watch pad
- Two cable choices
Hauptmerkmale
-
Design
The console module stores its retractable cables when they are not in use.
-
Konnektivität
Two cable styles offer Type-C + Type-C or Lightning + Type-C device ends.
-
Laden
A magnetic pad charges an Apple Watch.
-
Stromversorgung
Powered from the vehicle USB-C supply.
-
Installation
The module is described for existing console fitting without wire cutting or splicing.
Highlights
Retractable device connections
Choose two Type-C device ends or one Lightning and one Type-C device end. Extend the cables gently for charging and guide them back without pinching or pulling on the module.
Magnetic watch charging position
The module includes a dedicated magnetic wireless pad described for Apple Watch. No charging rate is stated, and not every Apple Watch generation is covered.
Power Input
The dock runs from the vehicle USB-C port. The device cable ends do not identify the input.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | |
| Model Y Juniper | 2025+ | |
| Model YL 6-Seater | 2026+ |
No electrical approval is stated.
Technische Daten
| Produkttyp | Hidden console charging dock with retractable cables |
|---|---|
| Compatible Models | Listed Model 3 Highland 2024+, Model Y Juniper 2025+, Model YL 6-Seater 2026+ |
| Position / Location | Center console |
| Konnektivität | Magnetic wireless charging pad described for Apple Watch |
| Eingang | USB-C vehicle-port power described; match delivered module input and ratings before connection |
| Connector Type | Type-C + Type-C or Lightning + Type-C retractable device cables |
| Installation Type | Console fitting with existing supply; no cutting or splicing described |
Installation
- Fit the module to the console with power disconnected.
- Connect the input to the vehicle USB-C port.
- Use the described existing-supply arrangement only when the actual components agree; do not cut or splice vehicle wiring, force connectors or improvise adapters.
- Route cables clear of pinch points and driving controls, then test charging with compatible devices. Disconnect if there is unusual heat or a connection fault.
Gut zu wissen
Achtung
- The Type-C/Lightning device ends are outputs, not the supply input.
- Charging rate and simultaneous operation depend on the vehicle supply, module and connected devices. No fast charging, full-speed multi-device output or specific Apple Watch generation support is claimed.
- Use for the described charging purpose; USB data transfer, Sentry recording and independent power channels are not specified. Do not substitute it for a required vehicle data connection.
- Stop use if the module, connector or cables become damaged or unusually hot. A non-spliced installation does not guarantee vehicle warranty coverage.
Pflege
- Keep connectors and watch charging surfaces clean and dry.
- Guide retractable cables back gently.
FAQ
Which cable styles are offered?
Type-C + Type-C or Lightning + Type-C. These are the retractable device-cable options, not a specification of the input supply.
How is the dock powered?
From the existing vehicle USB-C power.
Will all connected devices charge at full speed?
No fixed output or simultaneous full-speed performance is established here. Charging depends on the supply, module, device and charging protocol.
Does it support every Apple Watch?
No. It has a magnetic Apple Watch charging pad; fast charging is not stated.
Is warranty coverage guaranteed?
No. Coverage depends on vehicle terms, region and the cause of a particular fault.
English 
German 
Spanish 