Front Seat Belt Assembly 1493802-C1-D / 1493803-C1-D for Tesla Model Y (2020–2024)

Front Seat Belt Assemblies by Left or Right Side

This front seat belt and retractor assembly is offered for Model Y 2020–2024 in left, right or combined options. The left reference number is 1493802-C1-D and the right is 1493803-C1-D; the sides are not interchangeable.

Front Seat Assembly
Left or Right
Side-Specific References
SRS Component

Hauptmerkmale

Front Seat Assembly

This product is a front seat belt and retractor assembly for the listed Model Y application.
Side-Specific Options

Choose Front Left, Front Right or the Left and Right combination; the two sides are not interchangeable.
Left Reference Number

The Front Left option names 1493802-C1-D for comparison with the required assembly.
Right Reference Number

The Front Right option names 1493803-C1-D for comparison with the required assembly.
Polyester Webbing

The belt uses polyester webbing with a retractor mechanism.
SRS Installation

Installation follows the applicable vehicle restraint-system procedure.

Highlights

Belt Webbing and Hardware

The complete assembly view shows black webbing, guide hardware and the retractor housing. The pictured layout does not establish genuine-part provenance.

Retractor Assembly View

Another angle shows the retractor with the belt routed through its guide hardware.

Kompatibilität

Modell	Years / Version	Hinweise
Model Y	2020–2024	Left reference 1493802-C1-D; right reference 1493803-C1-D.

Reference numbers guide selection; they do not establish genuine-part provenance or safety certification.

Technische Daten

Produkttyp	Front seat belt and retractor assembly
Compatible Models	Model Y (2020–2024)
Position / Location	Front Left or Front Right
Material	Polyester belt webbing
Menge	One side or left-and-right combination, depending on option
OEM Part Number	Left reference: 1493802-C1-D; right reference: 1493803-C1-D
Installation Type	Workshop installation; vehicle-specific procedure and diagnostics
Versandgewicht	500 g (1.10 lb) per side; 1000 g (2.20 lb) combined option

Installation

Difficulty: Advanced
Werkzeuge: Ratchet, socket set and trim removal tools listed

Gut zu wissen

Achtung

This is a safety-critical restraint component.
The Tesla SRS procedure requires new, genuine replacement components with clear identification, not repaired SRS parts or components taken from another vehicle.
Follow the complete vehicle-specific restraint-system isolation and installation procedure. A generic low-voltage battery-disconnection step is not a substitute.

FAQ

Are the left and right assemblies interchangeable?

No. The options identify Front Left reference 1493802-C1-D and Front Right reference 1493803-C1-D.

Is a reference number enough to approve installation?

No. A reference number does not establish genuine-part provenance or safety certification.

Can I use a repaired or second-hand SRS component?

Tesla SRS requirements call for new genuine, clearly identified replacement components, not repaired SRS parts or components taken from another vehicle.

Should I install this assembly myself?

Use a trained restraint-system technician who follows the complete vehicle-specific procedure and performs the required post-installation diagnostics.

Does selecting the part guarantee no warning lights?

No. Vehicle configuration and installation can affect system status.