Pre-Cut TPU Headlight Film in Three Finishes
Choose a two-piece TPU headlight film kit for Model 3 2017–2023 or Model 3 Highland 2024+. Clear, Smoked Tint and Photochromic options offer different appearances; Photochromic changes between clearer and tinted states with light conditions.
- Pre-Cut Pattern
- TPU Film
- 3 Finishes
- 2 Pieces
Hauptmerkmale
-
Two Vehicle Patterns
Choose the Model 3 2017–2023 or Highland 2024+ version.
-
Three Finish Choices
Clear, Smoked Tint and Photochromic options give different appearances.
-
TPU Film
The flexible film is intended for application over the headlight lens.
-
Two-Piece Kit
Each kit contains two pre-cut film pieces.
-
Wet Application
Position and squeegee the film using the exact installation instructions.
-
Finish Planning
Each kit is pre-cut for its listed headlamp shape.
Highlights
Three Finish Appearances
The comparison illustrates Clear, Smoked Tint and light-reactive Photochromic finishes. It shows appearance options, not the exact pattern for every headlamp or proof of unchanged light output.
Wet Positioning and Squeegeeing
The wet-application example shows film being positioned with water and a squeegee. Curved edges require re-wetting and careful water removal; the example does not establish approval of a selected lamp and film combination.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Select the corresponding two-piece headlamp pattern |
| Model 3 Highland | 2024+ | Select the corresponding two-piece headlamp pattern |
Fits Model 3 2017–2023 and Model 3 Highland 2024+. Clear film is not automatically approved for road use.
Technische Daten
| Produkttyp | Pre-cut headlight film |
|---|---|
| Compatible Models | Model 3 2017–2023 / Model 3 Highland 2024+, selected headlamp pattern |
| Position / Location | Headlight lens surface |
| Material | TPU (thermoplastic polyurethane) |
| Surface Finish | Clear / Smoked Tint / Photochromic |
| Menge | 2 film pieces per kit |
| Installation Type | Wet application |
What’s in the Box
- 2 pre-cut headlight film pieces
Installation
- Wash the headlight with a compatible detergent and remove dust, grease and fingerprints.
- Spray the film with water and lay it over the headlight in position.
- Slide the film into place while spraying water; reposition it before squeegeeing.
- Push water out from the bottom and along curved edges with a scraper or squeegee.
- Lift and re-wet a curved edge that is not adhering, then reapply it and squeegee.
- Scrape out remaining water; repeat the edge re-wetting step if the film is still not adhering.
- Wipe the headlight surface with a soft, dry towel.
- After drying, use a heat gun to flatten uneven areas and set the edges within the film and headlamp instructions.
Gut zu wissen
Achtung
- Film over a headlamp lens can affect required lighting.
- In the United States, installation by manufacturers, dealers, distributors and repair businesses must not make required lighting inoperative.
- Avoid excessive heat and aggressive cleaners.
Pflege
- Use gentle cleaning compatible with the film and lamp. Inspect edges for lifting or trapped dirt.
- Do not treat heat as a guarantee of scratch removal or use excessive heat on a headlamp lens.
FAQ
Which vehicle versions are offered?
Model 3 2017–2023 and Model 3 Highland 2024+, each with two film pieces.
What is the difference between the finishes?
Clear is transparent, Smoked Tint gives a darker appearance, and Photochromic changes appearance with light conditions.
Does Smoked film leave light output unchanged?
No. Smoked film darkens the lamp appearance and can reduce light output.
Is Clear film automatically approved for road use?
No. Road-use approval of headlamp film depends on local lighting rules.
Are tools included?
No. The kit contains two film pieces; application tools are not included.
English 
German 
Spanish 