A Ver.1 Real Carbon Fiber Spoiler for the Model Y
Add the Ver.1 carbon fiber spoiler profile to the rear trunk of your pre-Juniper Model Y 2020–2024. Choose glossy 3K weave, matte 3K weave or a glossy forged pattern. The spoiler mounts with included 3M VHB adhesive tape.
- Real Carbon Fiber
- Model Y 2020–2024
- 3M VHB Tape Included
- 3 Finishes
Key Features
-
Real Carbon Fiber
Available with a 3K (2×2) woven or forged carbon pattern.
-
Ver.1 Rear Profile
A raised spoiler shape adds a motorsport-inspired detail to the Model Y rear.
-
Three Finish Choices
Select glossy woven, matte woven or glossy forged carbon.
-
Clear-Coat Finish
The coated carbon surface needs gentle cleaning with a soft cloth.
-
3M VHB Mounting
Included adhesive tape attaches the spoiler to the matching trunk surface.
-
Adhesive Mounting
Mounts with 3M VHB tape; allow the adhesive to cure.
Highlights
Real Carbon Fiber
The spoiler uses a 3K (2×2) woven pattern or a forged carbon pattern, and minor pattern variations are normal in carbon fiber.
Three Finishes
Glossy 3K weave, matte 3K weave or glossy forged carbon pattern give you a classic, understated or marbled look.
Coated Carbon Surface
A clear-coated surface highlights the selected carbon pattern. Clean gently and avoid abrasive products to maintain the finish.
Align Before Bonding
Install at 15–30°C (59–86°F), test fit first, gently warm the tape within the supplied temperature limit, press evenly and allow 48–72 hours before washing.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y (pre-Juniper) | 2020-2024 | Rear trunk |
Fits pre-Juniper Model Y 2020–2024.
Specifications
| Product Type | Carbon fiber rear trunk spoiler (Ver.1) |
|---|---|
| Compatible Models | Model Y 2020-2024 (pre-Juniper) |
| Position / Location | Rear trunk |
| Material | Real carbon fiber, 3K woven or forged pattern, with clear-coat finish |
| Surface Finish | Glossy 3K woven, Matte 3K woven or Forged carbon (glossy) |
| Pattern / Weave | 3K (2×2) woven pattern or forged carbon pattern |
| Installation Type | 3M VHB adhesive tape (included) |
| Package Contents | 1 carbon fiber rear spoiler with 3M VHB adhesive tape |
What's in the Box
- 1×Carbon Fiber Rear Spoiler
- 3M VHB Adhesive Tape
Installation
- Clean the trunk surface thoroughly with isopropyl alcohol, remove any wax, oil or debris and dry it completely; install at 15-30°C (59-86°F).
- Position the spoiler with the adhesive backing still on to align it.
- Gently heat the 3M VHB tape with a hair dryer for 30-60 seconds, keeping it below 40°C (104°F).
- Remove the backing, position the spoiler carefully and press firmly for 60 seconds with even pressure.
- Hold the spoiler with painter’s tape for the first 24 hours and allow 48–72 hours to cure before washing.
Good to Know
Caution
- Fits pre-Juniper Model Y 2020–2024.
- Install at 15–30°C (59–86°F) and do not heat the tape above 40°C (104°F).
- Allow 48–72 hours for adhesive curing before washing.
Care
- Clean with pH-neutral car soap and a soft microfiber cloth.
- Avoid automated car washes for the first 7 days.
FAQ
Does it fit the Model Y Juniper?
No. It fits the pre-Juniper Model Y 2020-2024 only.
What is the spoiler made of?
Real carbon fiber with a 3K woven or forged pattern and a clear-coat finish.
Which finishes can I choose?
Glossy 3K woven, Matte 3K woven or glossy Forged carbon.
How does the spoiler attach?
It uses included 3M VHB adhesive tape. Clean and dry the trunk, test the fit, then attach it and allow the tape to cure.
English 
German 
Spanish 