A Pre-Cut Patterned Film Set for All Four Door Handles
This set includes four patterned polyethylene films for the exterior handles of the Model 3 or Model Y. The pre-cut pieces follow the handle contours, with six printed designs available. These are surface films, not replacement handles.
- 4-Piece Set
- Pre-Cut Pieces
- 6 Printed Designs
Key Features
-
Pre-Cut Handle Pieces
The films follow the exterior door-handle contours of the Model 3 and Model Y.
-
Four-Piece Set
A set covers the front and rear handles on both sides of the vehicle.
-
Six Printed Designs
Choose a classic, matrix, circuit, minimalist or rainbow design from the six options.
-
Polyethylene Film
The patterned film adds a covering over the handle surface.
-
Peel-and-Stick Fitting
Align each piece before gradually removing the backing and smoothing it down.
-
Care After Fitting
Leave at least 24 hours before washing and avoid direct high-pressure spray at the edges.
Highlights
Four Handle Pieces
The shaped pieces cover the four handle surfaces. The selected design determines the printed finish.
Matrix Pattern Example
The green matrix design is one of the six printed options.
Rainbow Pattern Example
Rainbow designs add a colored detail to the handle. They are printed finishes rather than invisible clear film.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017+ | Includes Highland |
| Model Y | 2020+ | Includes Juniper |
Fits Model 3 2017+ (including Highland) and Model Y 2020+ (including Juniper).
Specifications
| Product Type | Door handle protection film (4-pack) |
|---|---|
| Compatible Models | Model 3 2017-present and Model Y 2020-present |
| Position / Location | All four door handles: front and rear, driver and passenger |
| Material | Polyethylene film with printed design |
| Pattern / Weave | Six printed designs: Black and White Classic Line Terms, Green Matrix model, White Ink Technology Circuits, White Ink Ultimate Simplicity, Sunshine Rainbow and Healing Rainbow |
| Quantity | 4 pieces |
| Installation Type | Peel-and-stick, dry or wet method |
| Installation Time | Approximately 15–20 minutes for four handles; leave at least 24 hours before washing |
| Package Contents | 4 door handle protection films and installation instructions |
| Shipping Weight | 100 g (0.22 lb) |
| Package Size | 23 × 10 × 5 cm |
What's in the Box
- 4×Door-handle films in the selected design
- Installation instructions
Installation
- Clean and dry the handles with suitable products.
- Align the piece with the handle surface, peel a small portion of backing and progressively smooth the film from the center toward the edges.
- Settle the edges without covering moving gaps. Leave at least 24 hours before washing.
Good to Know
Caution
- Use cleaning and removal products compatible with the handle finish. Test on a small inconspicuous area first.
- Removal can leave adhesive residue or affect an existing finish; do not overheat the handle or force the film off.
Care
- Hand wash for the first week after fitting. Use pH-neutral vehicle wash products and a soft microfiber towel.
- Avoid directing high-pressure water at the film edges.
FAQ
Is this clear, invisible film?
These are patterned films. Six printed designs are available, including classic, matrix, circuit, minimalist and rainbow options.
Which handles does the set cover?
The four pieces cover the front and rear door-handle surfaces on both sides of a Model 3 or Model Y.
What comes in the package?
Four door-handle films in the selected design, plus installation instructions. Preparation and smoothing tools are separate.
How should I remove the film later?
Warm gently and peel slowly. Avoid overheating and test any residue cleaner for compatibility with the handle finish.
English 
German 
Spanish 