A Performance-Style Dry Carbon Spoiler
A dry carbon fiber spoiler for the rear edge of the trunk lid, offered in matte, glossy woven-carbon and glossy forged-carbon finishes. Choose the separate version for original Model 3, Model 3 Highland or original Model Y. Supplied 3M VHB tape provides the adhesive mounting.
- Dry Carbon Fiber
- 3 Finishes
- Adhesive Mount
- Model-Specific Versions
Key Features
-
Dry Carbon Body
A dry carbon fiber trunk spoiler in a performance-style profile
-
Three Finishes
Matte carbon, glossy carbon or glossy forged-carbon appearance, selected separately
-
Model-Specific Versions
Separate options for original Model 3, Highland and original Model Y
-
Trunk-Lid Placement
A curved spoiler follows the rear edge of the trunk lid
-
Adhesive Mounting
Supplied 3M VHB double-sided tape fixes the spoiler to the trunk
-
Surface Preparation
An alcohol wipe is included for the installation area
-
48-Hour Wash Wait
Allow 48 hours after installation before washing
Highlights
Performance-Style Profile
The curved spoiler adds a raised edge along the rear of the trunk lid.
Carbon Surface Detail
Woven-carbon versions use a 3K pattern. The glossy forged-carbon option has a different pattern rather than the same woven appearance.
Adhesive Installation
3M VHB tape and an alcohol wipe are supplied. Test-fit the entire contact edge before removing the backing.
Choose Your Finish
Select matte carbon, glossy carbon or glossy forged carbon from the model-specific options. Photos show selected examples rather than every finish.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–2023.10 | Trunk spoiler |
| Model 3 Highland | 2024+ | Trunk spoiler |
| Model Y | 2020–2025.02 | Trunk spoiler |
Choose the actual model-specific version. The Model Y option ends at 2025.02 and is not the Juniper version. Test-fit the full contact edge before bonding.
Specifications
| Product Type | Performance-style dry carbon fiber trunk spoiler |
|---|---|
| Compatible Models | Model 3 (2017–2023.10), Model 3 Highland (2024+), Model Y (2020–2025.02) |
| Position / Location | Trunk lid |
| Material | Dry carbon fiber; woven-carbon or forged-pattern version as selected |
| Surface Finish | High-gloss, matte or glossy forged carbon |
| Pattern / Weave | 3K weave for woven-carbon versions; forged pattern for the glossy forged option |
| Quantity | 1 spoiler |
| Installation Type | 3M VHB double-sided tape (included) |
| Package Contents | Spoiler, 3M VHB double-sided tape, alcohol wipe |
| Shipping Weight | 2 kg (4.4 lb) |
What's in the Box
- 1×Dry carbon fiber spoiler
- 1×3M VHB double-sided tape
- 1×Alcohol wipe
Installation
- Align the spoiler on the trunk lid while the adhesive backing is still on.
- Clean the mounting area using products compatible with the paint or existing coating. Use the supplied wipe only where appropriate and let the surface dry.
- If warming the tape, use a hair dryer without exceeding 40°C. Remove the backing, position carefully and apply even pressure for 30 seconds.
- Allow 48 hours before washing.
Good to Know
Caution
- Each model has its own spoiler version.
- Use only preparation products compatible with the paint or protective coating. Keep tape heating at or below 40°C and avoid overheating the paint.
- Adhesive cure time before washing is 48 hours.
Care
- Clean without abrasive products.
FAQ
What comes with the spoiler?
One spoiler, 3M VHB double-sided tape and an alcohol wipe.
Does the Model Y option fit Juniper?
No. The Model Y option fits 2020–2025.02 and does not fit Juniper.
How long should I wait before washing?
Allow 48 hours after installation before washing.
Is the forged option also a 3K weave?
No. The glossy forged-carbon option has a forged pattern; the woven-carbon options use a 3K pattern.
English 
German 
Spanish 