A Streaming Rearview Mirror for HW4.0 Vehicles
This mirror-format IPS display shows a rear camera view and includes recording and playback controls. Choose the Single Camera or Dual Camera kit that matches your vehicle and factory group. Juniper options name an 8.9-inch display; Highland and 2024 Model Y options name a nine-inch display. The product is for HW4.0 camera vehicles.
- IPS Display
- HW4.0 Only
- Camera Kit Options
Características principales
-
Mirror Display
The IPS screen provides a camera view in a mirror-format housing with a reflective surface when the screen is off.
-
Version Selection
Juniper options are grouped by Fremont/Shanghai or Berlin/Austin; choose the matching vehicle and factory version.
-
HW4.0 Requirement
This product is offered for HW4.0 camera vehicles and is not suitable for HW3.0.
-
Camera Kit Choices
Single Camera and Dual Camera are separate purchase configurations; use the instructions and camera connections supplied for the selected kit.
-
Dedicated Interface
The mirror specifies a dedicated eight-pin connection with a 12 V, 1 A input rating; it requires the matched vehicle interface.
-
Recording Controls
The mirror interface includes DVR, playback and settings controls.
Aspectos destacados
Mirror-Format Display
The display fits the interior mirror position and has a reflective surface when the screen is off.
Rear Camera View
The installed example shows rear imagery on the mirror display. Camera imagery does not remove blind spots or replace the mirrors.
Recording and Settings
The interface includes DVR, playback and settings. Set up the selected kit’s recording storage and test playback while parked before relying on saved footage.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | March 2025+ | 8.9-inch; select Fremont & Shanghai version; HW4.0 only. |
| Model Y Juniper | March 2025+ | 8.9-inch; select Berlin & Austin version; HW4.0 only. |
| Model 3 Highland | 2024+ | Nine-inch option; excludes Berlin version; HW4.0 only. |
| Model Y | 2024 only | Nine-inch option; excludes Berlin version; HW4.0 only. |
Each option is tied to factory, camera hardware and harness version. Does not fit Model Y L or HW3.0 vehicles.
Especificaciones
| Tipo de producto | Streaming rearview mirror recorder kit |
|---|---|
| Compatible Models | HW4.0 Model Y Juniper March 2025+; Model 3 Highland 2024+; Model Y 2024 only, by vehicle and factory option |
| Position / Location | Interior rearview mirror position |
| Material | ABS + PC + mirror-coated glass |
| Tamaño de pantalla | 8.9 in (22.6 cm) for Juniper options; 9 in (22.9 cm) for Highland and 2024 Model Y options |
| Resolución | 9-inch display specification: 1600 × 384; rear imaging specification: 1080p |
| Display Type | IPS |
| Tensión | 12 V mirror input rating; use the designated matched interface |
| Corriente | 1 A mirror input rating |
| Connector Type | Dedicated eight-pin interface |
| Sensor | CMOS camera sensor |
| Camera Options | Single Camera or Dual Camera kit, selected with the vehicle/factory version |
What's in the Box
- 1×Streaming rearview mirror recorder kit in the selected vehicle, factory and camera configuration
Instalación
- Install and connect only the camera components specified for the selected Single Camera or Dual Camera kit.
- Position the mirror so it does not obstruct the driver’s view, front or cabin cameras, or any equipped cabin radar. Restore power using the applicable vehicle procedure.
Conviene saber
Precaución
- For HW4.0 camera vehicles only.
- The nine-inch options exclude the Berlin version. Juniper requires the appropriate Fremont/Shanghai or Berlin/Austin kit.
- The 12 V-rated mirror connects through the designated vehicle interface.
- A camera view does not eliminate blind spots.
Cuidado
- Clean the mirror surface gently with a soft cloth; avoid abrasive cleaners and liquid entering the housing or connectors.
- Keep the relevant camera lens clean using guidance suitable for that camera. Inspect mounts and cable retention regularly.
- Memory card not included.
Preguntas frecuentes
Does it work with HW3.0?
No. These options are for HW4.0 camera vehicles only.
Which Juniper factory version should I select?
Offered in Fremont & Shanghai and Berlin & Austin factory groups. Highland and 2024 Model Y nine-inch options exclude the Berlin version.
Can I connect it to any vehicle power supply?
No. The mirror input is rated 12 V, 1 A and uses a dedicated eight-pin interface.
Does Single Camera mean it uses the original Tesla camera?
Use the camera components and connection method specified for the selected kit. The option name alone does not establish original-camera reuse or an interchangeable camera connection.
Will it eliminate blind spots or always save footage?
No. Camera views have limits, and recording depends on correct setup and available storage.
English 
German 
Spanish 